Here at Solarbotics, we like to celebrate things. And today we're remembering a supernova that took place in the Ophiuchus constellation and was observed by German astronomer Johannes Kepler back in 1604. That poor star, it was taken before its time. So to commemorate the memory of that star, (aptly named SN 1604, but we […]
Project: APA102-2020 MicroNova Custom LE...
Solar botics
February 23, 2018
I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips.
Photo by Yeti, edited by Batgirl
These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED.
This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - twice the density!
Reason for a Choker necklace:
Hats have been done, shoes have been done, pendants have been done.
This is something new for a Valentine’s dance costume, so I decided to go with a choker design. I also wanted something that was interactive, something that would add another layer of WOW to just lighting.
Build:
I used a Wemos D1 Mini development board along with a boost-converting battery shield for the Wemos D1.
The battery shield was a particularly good choice here because the MicroNova LEDs should be supplied a solid 5VDC. This board boosts the battery voltage to 5V, and then the Wemos D1 Mini bucks it down to 3V3 for it's own operation.
A mini SPDT Slide switch toggles the power from the battery shield to the D1. This allows charging the battery using the battery shield USB connector while not powering the D1.
Epoxy locks the switch and wires in place.
The battery used is a conveniently handy older 450mAh Lithium Polymer. Depending on the lighting mode, this battery can power the necklace for a couple of hours.
I used elastic thread to attach the LED strip and components to the necklace. A heavy duty needle was all that was needed to punch through the (imitation) leather belt. Because the thread was elastic and tied under tension, it held the MicroNova strip well in place.
Operation:
When the choker powers up, it creates a WiFi Access Point called "HeartBurnChoker1".
Once I connected to this WiFi, I opened a browser and went to 192.168.4.1. The control interface is simple, but effective. The D1 Mini has more than ample power and speed to effectively drive these LEDs. The MicroNova features separate clock & data lines, so even relatively slow I/O (like Raspberry Pi) can still make it work.
MORE POSTS
The Solar Marble Machine
... is here! Check it out in all it's glorious wooden-ness (Russian birch-ness even!): Starting today the Marble Machine is available at our website for backorder, and fully available for purchase starting May 18. The Solar Marble Machine is a result of collaboration of Solarbotics with MSRaynsford, whose original design was reworked as a solar-powered […]
Wednesday Cool Links: Light Stuff, Edibl...
As of early September the trees learned how to shed leaves. They were so graceful and efficient, that I start to wonder if they have an MFA in Shedding Leaves. Now, the question is - did they create this white stuff that now lies on the ground as well? Because if they did, they didn’t […]
Painted GraviTrack
We always enjoy seeing our products being modified, revamped and DIY-ed, as well as the results of these transformations. Our customer Vera Kark provided us with some thoughtful feedback on adding mechanical tweaks to improve our Solar GraviTrack build and documentation. She also painted the brown MDF of the machine. She used tempera paint on the wood components still in panelized […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.