We're a Canadian Company, but the impact of the over-zealously worded American Legislation H.R.3261 "Stop Online Piracy Act" and S.968 "PROTECT IP" will affect foreign Internet sites. Being a central backbone to the Internet, the USA has an uncomfortably large influence on the rest of the English-speaking web, and so it's of our Canadian interest […]
Project: APA102-2020 MicroNova Custom LE...
Solar botics
February 23, 2018
I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips.
Photo by Yeti, edited by Batgirl
These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED.
This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - twice the density!
Reason for a Choker necklace:
Hats have been done, shoes have been done, pendants have been done.
This is something new for a Valentine’s dance costume, so I decided to go with a choker design. I also wanted something that was interactive, something that would add another layer of WOW to just lighting.
Build:
I used a Wemos D1 Mini development board along with a boost-converting battery shield for the Wemos D1.
The battery shield was a particularly good choice here because the MicroNova LEDs should be supplied a solid 5VDC. This board boosts the battery voltage to 5V, and then the Wemos D1 Mini bucks it down to 3V3 for it's own operation.
A mini SPDT Slide switch toggles the power from the battery shield to the D1. This allows charging the battery using the battery shield USB connector while not powering the D1.
Epoxy locks the switch and wires in place.
The battery used is a conveniently handy older 450mAh Lithium Polymer. Depending on the lighting mode, this battery can power the necklace for a couple of hours.
I used elastic thread to attach the LED strip and components to the necklace. A heavy duty needle was all that was needed to punch through the (imitation) leather belt. Because the thread was elastic and tied under tension, it held the MicroNova strip well in place.
Operation:
When the choker powers up, it creates a WiFi Access Point called "HeartBurnChoker1".
Once I connected to this WiFi, I opened a browser and went to 192.168.4.1. The control interface is simple, but effective. The D1 Mini has more than ample power and speed to effectively drive these LEDs. The MicroNova features separate clock & data lines, so even relatively slow I/O (like Raspberry Pi) can still make it work.
MORE POSTS
Wednesday Links and MakerFaireYYC
MakerFaireYYC - we were there, to prove that check out some pics on our photostream. Also in our spare time we browsed some internets and brought you some hand-picked links with random, funny, interesting and cool: Little Robot Friends: Customizable Robots with Evolving Personalities Toronto-based Aesthetec Studio created these awesome little robots that communicate with […]
Hello...? Is this thing on....?
This is was just a Test. This is a test of the Dave broadcasting system. If this was a real Dave, you'd be notified what to do in the eventuality that you met a real Dave. This has been a test of the Dave broadcasting system. *Beeeeeep* Ok, it seems like we've got […]
Remember the GM5?
Hoped you ordered one while you had the chance - they're all gone now! I will most likely be a looong time before these come back, so please don't contact us asking for more - it was a rare deal for Solarbotics, which we were glad to bring to you for as long as it […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.