I wonder what's going to happen if you stuff all the dry beer ingredients in your mouth? Would you turn into a foam spitting monster, a rabid-looking human? Read along, and you'll know what I'm talking about: Glassified: Augmenting a traditional ruler with digital functionality I am past needing this for school, but I sure […]
Project: APA102-2020 MicroNova Custom LE...
Solar botics
February 23, 2018
I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips.
Photo by Yeti, edited by Batgirl
These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED.
This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - twice the density!
Reason for a Choker necklace:
Hats have been done, shoes have been done, pendants have been done.
This is something new for a Valentine’s dance costume, so I decided to go with a choker design. I also wanted something that was interactive, something that would add another layer of WOW to just lighting.
Build:
I used a Wemos D1 Mini development board along with a boost-converting battery shield for the Wemos D1.
The battery shield was a particularly good choice here because the MicroNova LEDs should be supplied a solid 5VDC. This board boosts the battery voltage to 5V, and then the Wemos D1 Mini bucks it down to 3V3 for it's own operation.
A mini SPDT Slide switch toggles the power from the battery shield to the D1. This allows charging the battery using the battery shield USB connector while not powering the D1.
Epoxy locks the switch and wires in place.
The battery used is a conveniently handy older 450mAh Lithium Polymer. Depending on the lighting mode, this battery can power the necklace for a couple of hours.
I used elastic thread to attach the LED strip and components to the necklace. A heavy duty needle was all that was needed to punch through the (imitation) leather belt. Because the thread was elastic and tied under tension, it held the MicroNova strip well in place.
Operation:
When the choker powers up, it creates a WiFi Access Point called "HeartBurnChoker1".
Once I connected to this WiFi, I opened a browser and went to 192.168.4.1. The control interface is simple, but effective. The D1 Mini has more than ample power and speed to effectively drive these LEDs. The MicroNova features separate clock & data lines, so even relatively slow I/O (like Raspberry Pi) can still make it work.
MORE POSTS
Solarbotics Sponsoring Wilf!
Solarbotics is pleased to be bringing Wilf Rigter to the Western Canadian Robot Games this April 6 &7. Anybody familiar with the BEAM mailing list will undoubtably recognize the contribution Mr. Rigter has made with his plethora of circuits and ideas. Come out and meet the man behind the email!
Minor Additions and New Links
Boy, there's work to do on new websites. Link checking, spell checking, image links - all sorts of crap that doesn't have anything to do directly with robots! Even so, we've been able to put up a few new images of Mark Tilden's "Projectorbots" on the Photovores page. Yuck. Must do something about how hard […]
Interesting stuff at the Exploratorium
Not exactly relevant to BEAM, but an interesting distraction: Here's some interesting media from the San Francisco Exploratorium. Notable media to watch is their "Iron Science Teacher" competition (familiar with "The Iron Chef? Same idea...), and their hosting of Robot Sumo Wrestling.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.