Project: APA102-2020 MicroNova Custom LE...

Solar botics
February 23, 2018

I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips.

Photo by Yeti, edited by Batgirl

These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED.

This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - twice the density!

Reason for a Choker necklace:

Hats have been done, shoes have been done, pendants have been done.
This is something new for a Valentine’s dance costume, so I decided to go with a choker design. I also wanted something that was interactive, something that would add another layer of WOW to just lighting.

Build:

I used a Wemos D1 Mini development board along with a boost-converting battery shield for the Wemos D1.


The battery shield was a particularly good choice here because the MicroNova LEDs should be supplied a solid 5VDC. This board boosts the battery voltage to 5V, and then the Wemos D1 Mini bucks it down to 3V3 for it's own operation.

A mini SPDT Slide switch toggles the power from the battery shield to the D1. This allows charging the battery using the battery shield USB connector while not powering the D1.

Epoxy locks the switch and wires in place.

The battery used is a conveniently handy older 450mAh Lithium Polymer. Depending on the lighting mode, this battery can power the necklace for a couple of hours.

I used elastic thread to attach the LED strip and components to the necklace.  A heavy duty needle was all that was needed to punch through the (imitation) leather belt.  Because the thread was elastic and tied under tension, it held the MicroNova strip well in place.

Operation:

When the choker powers up, it creates a WiFi Access Point called "HeartBurnChoker1".

 

 

 

 

 

 

Once I connected to this WiFi, I opened a browser and went to 192.168.4.1. The control interface is simple, but effective. The D1 Mini has more than ample power and speed to effectively drive these LEDs. The MicroNova features separate clock & data lines, so even relatively slow I/O (like Raspberry Pi) can still make it work.

 

 

MORE POSTS

July 6, 2017
Freezer Burn 2017 Pendant

Freezer Burn is an Alberta Regional Burning Man celebration annually creating a temporary community out on the prairie. A few of us here at Solarbotics attend, and having access to all of the neat technology, we make an effort to bring special projects to the festival. Lit up projects work well since the event is […]

November 23, 2003
GM10 Modifications

Grant has taken some time to document how to turn a standard 81:1 GM10 pager gear motor and turn it into a 9:1 version. Why would you want to do that? You tell me - I'd love to know what project you build with a speed demon like that! Read More...

October 24, 2011
RC Brutusbot n' Communication Stuff

Help! It's getting colder outside and the trees are starting to shed all over everything. It's quite a mess. It's pretty, but a mess all the same. So we did what anyone would do in such circumstances - we made a small DIY tank platform wirelessly controllable, released a new breakout board, and put together […]

November 1, 2005
Make Magazine! Servo Magazine!

Woot! (Ok, I know it's spelt W007) The Sumovore is featured in volume 4 of Make Magazine in their suggested shopping list! For those of you who don't know about this killer quarterly publication from the fine folks at O'Reilly & Associates, you have to check it out. Makezine is ideal for all you DIY […]

1 17 18 19 20 21 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.