Hey look, we're at Maker Faire! Hey look, we're at the Solarbotics Office! ... Hey look, we're like an amoeba, splitting in half to be in two places at once. Ok, here's the skinny - Right now, most of our staff is US-bound to attend the previously mentioned MakerFaire in the San Mateo/Bay Area in […]
Project: APA102-2020 MicroNova Custom LE...
Solar botics
February 23, 2018
I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips.
Photo by Yeti, edited by Batgirl
These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED.
This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - twice the density!
Reason for a Choker necklace:
Hats have been done, shoes have been done, pendants have been done.
This is something new for a Valentine’s dance costume, so I decided to go with a choker design. I also wanted something that was interactive, something that would add another layer of WOW to just lighting.
Build:
I used a Wemos D1 Mini development board along with a boost-converting battery shield for the Wemos D1.
The battery shield was a particularly good choice here because the MicroNova LEDs should be supplied a solid 5VDC. This board boosts the battery voltage to 5V, and then the Wemos D1 Mini bucks it down to 3V3 for it's own operation.
A mini SPDT Slide switch toggles the power from the battery shield to the D1. This allows charging the battery using the battery shield USB connector while not powering the D1.
Epoxy locks the switch and wires in place.
The battery used is a conveniently handy older 450mAh Lithium Polymer. Depending on the lighting mode, this battery can power the necklace for a couple of hours.
I used elastic thread to attach the LED strip and components to the necklace. A heavy duty needle was all that was needed to punch through the (imitation) leather belt. Because the thread was elastic and tied under tension, it held the MicroNova strip well in place.
Operation:
When the choker powers up, it creates a WiFi Access Point called "HeartBurnChoker1".
Once I connected to this WiFi, I opened a browser and went to 192.168.4.1. The control interface is simple, but effective. The D1 Mini has more than ample power and speed to effectively drive these LEDs. The MicroNova features separate clock & data lines, so even relatively slow I/O (like Raspberry Pi) can still make it work.
MORE POSTS
Community Links, GM18 & GM19 Price ...
Hi there forks! We hope everyone out there is enjoying their first week of summer. School is wrapping up, the sun is out, and WATCH OUT, A FREAK SNOW STORM! I kid, I kid. But this is Calgary, so you never know. Over the course of the next summer months we're aiming to roll out […]
Friday New Product: PCBGrip
PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. T-Bolt Accessory (pairs) […]
Yahoo BEAM list down?
We're having problems pinging the Yahoo BEAM list. With 800+ members, it's been the core way we've all be discussing things BEAM, so we're preparing for the worst. We're accelerating our deployment of a list replacement / backup / archive under solarbotics.net. We'll be attempting to send subscription invitation emails to members who posted messages […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.