Project: APA102-2020 MicroNova Custom LE...

Solar botics
February 23, 2018

I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips.

Photo by Yeti, edited by Batgirl

These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED.

This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - twice the density!

Reason for a Choker necklace:

Hats have been done, shoes have been done, pendants have been done.
This is something new for a Valentine’s dance costume, so I decided to go with a choker design. I also wanted something that was interactive, something that would add another layer of WOW to just lighting.

Build:

I used a Wemos D1 Mini development board along with a boost-converting battery shield for the Wemos D1.


The battery shield was a particularly good choice here because the MicroNova LEDs should be supplied a solid 5VDC. This board boosts the battery voltage to 5V, and then the Wemos D1 Mini bucks it down to 3V3 for it's own operation.

A mini SPDT Slide switch toggles the power from the battery shield to the D1. This allows charging the battery using the battery shield USB connector while not powering the D1.

Epoxy locks the switch and wires in place.

The battery used is a conveniently handy older 450mAh Lithium Polymer. Depending on the lighting mode, this battery can power the necklace for a couple of hours.

I used elastic thread to attach the LED strip and components to the necklace.  A heavy duty needle was all that was needed to punch through the (imitation) leather belt.  Because the thread was elastic and tied under tension, it held the MicroNova strip well in place.

Operation:

When the choker powers up, it creates a WiFi Access Point called "HeartBurnChoker1".

 

 

 

 

 

 

Once I connected to this WiFi, I opened a browser and went to 192.168.4.1. The control interface is simple, but effective. The D1 Mini has more than ample power and speed to effectively drive these LEDs. The MicroNova features separate clock & data lines, so even relatively slow I/O (like Raspberry Pi) can still make it work.

 

 

MORE POSTS

August 26, 2015
Cool Links Wednesday: Cats, Whales and J...

Brought to you from every corner of the great internets. Laser Cut Junk Food..  by I'm Your Present (Via TLC) Leatherman Tread ..and the unboxing of it. Wonder how it will behave at airport security..(Via Notcot) Blue Whale Experience This is what it looks like being a blue whale and feeding on krill, by the Goldbogen […]

June 24, 2004
Solarbotics at PDXBot04

Grant and I have been back from PDXBot a few weeks now, and I put together a wee movie showing off some of the (limited) video I shot. You get to see Grant winning 2nd place in Mini-sumo, me NOT using a camera correctly (I got record on/off reversed during a Grant/me match), and some […]

December 16, 2011
Shipping Dates & Pre-Holiday Megapo...

Ok, we won't lie - we have a lot of content to show you today, so we're going to jump right in, starting with... Shipping Cutoff Dates It's getting down to the wire if you want to get a few last-minute gifts for Christmas. Here are our cutoff dates for submitting an order and still […]

August 29, 2002
GM2 Modifications

Our GM2 gearmotors are powerful, and just a bit slower than a standard servo, making them ideal for a walker. But for you folks who like wheeled robots, these are simply too slow. Solarbotics' own Grant McKee to the rescue! We barely had the motors opened 10 minutes before Grant figured out that these motors […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.