We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are […]
Zendulums for Japan - results!
Dave Hrynkiw
May 3, 2011
We've wrapped up our "Zendulums for Japan" support drive, and we're happy to announce we've sold 84 kits for a total of $2,396.07. A donation of $2400 is being processed to Red Cross Japan.
Thanks to all for assisting in our little effort to give some help!
MORE POSTS
Escaps back in stock!
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
Protected: 3D Printer Training - Crealit...
There is no excerpt because this is a protected post.
Circuit: Shok
You want a simple Photovore? This very tidy design by Solarbotics' own Grant McKee is based on a technique developed by Mark Tilden - Shok architecture.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.