There is no excerpt because this is a protected post.
We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready.
We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a handy pinout "Ground / Vcc / Signal", which also describes most servo interfaces. It's turning into the general standard for most dedicated interfaces. So, to make use of these with an Arduino, we've put together our own GVS Shield.
We could have made it with a simple 3-row x 18 block of male pins, but that wouldn't fit the locking buckle-type connectors found on many Phidget and other accessory items. We're using nicely space, proper shielded pin plugs. Here are some design highlights:
Yes, the name was a challenge. They didn't think I'd have the guts to follow through with the name, but it's just so suitable.
This project is inspired by Kimio Kosaka's One Chip Arduino project, where he jams all the parts for an Arduino on top of the IC, and just plugs the IC into the breadboard directly.
This is an Arduino PCB designed reverse to most others. Instead of mounting the IC to the board, we're mounting the board to the IC (let me clarify...).
Put all the stuff on the top. Install looong leads through the rows on the outside edge. Jamb your ATMega328 in from the underside so the chip leads are pointing down, in the same direction os the long leads. Tack solder the chip leads to the long leads. Or not, if you think friction fit works.
Depending how you soldered the ATmega to the pins, you can either make it fit a 0.3" space header (where it straddles the breadboard centerline perfectly) or 0.4" wide (where it straddles the breadboard centerline, but uses up 1 extra empty hole next to the centerline).
Besides needing an FTDI cable, or SparkFun-like USB adapter/programmer, this will be a very inexpensive and compact way to do Arduino development. Stay tuned!
There is no excerpt because this is a protected post.
This is a quick note to announce our holiday schedule, which is going to be as follows: December 24 (Christmas Eve)- 9am to 12pm (half day) December 25 (Christmas Day) - offices are closed December 26 (Boxing Day) - offices are closed December 31 (The Day Before New Year's Day) - 9am to 12pm (half […]
Question: What ever happened to punch cards? Nobody really knows, but the world became a much much darker place without them. There was something undeniably magical about making a computer do your bidding through feeding it a piece of paper with a bunch of holes in it ("THE ULTIMATE POWER IS MINE! I CAN NOW […]
The Western Canadian Robot Games is quickly approaching! May 10 & 11; SAIT Heart Building. Solarbotics will be there again, sponsoring (among other things) our own SolarSpeeder race. Aim your solarspeeder through a 4" gap in a wall 8 feet away, and win a ScoutWalker II kit! No registration required - just come on down […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.