SeeedStudio continues to impress us with he Grove line of Arduino/Pi/microcontroller compatible plug-in modules. Here's a fresh batch for today's product announcements.
We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready.
We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a handy pinout "Ground / Vcc / Signal", which also describes most servo interfaces. It's turning into the general standard for most dedicated interfaces. So, to make use of these with an Arduino, we've put together our own GVS Shield.
We could have made it with a simple 3-row x 18 block of male pins, but that wouldn't fit the locking buckle-type connectors found on many Phidget and other accessory items. We're using nicely space, proper shielded pin plugs. Here are some design highlights:
Yes, the name was a challenge. They didn't think I'd have the guts to follow through with the name, but it's just so suitable.
This project is inspired by Kimio Kosaka's One Chip Arduino project, where he jams all the parts for an Arduino on top of the IC, and just plugs the IC into the breadboard directly.
This is an Arduino PCB designed reverse to most others. Instead of mounting the IC to the board, we're mounting the board to the IC (let me clarify...).
Put all the stuff on the top. Install looong leads through the rows on the outside edge. Jamb your ATMega328 in from the underside so the chip leads are pointing down, in the same direction os the long leads. Tack solder the chip leads to the long leads. Or not, if you think friction fit works.
Depending how you soldered the ATmega to the pins, you can either make it fit a 0.3" space header (where it straddles the breadboard centerline perfectly) or 0.4" wide (where it straddles the breadboard centerline, but uses up 1 extra empty hole next to the centerline).
Besides needing an FTDI cable, or SparkFun-like USB adapter/programmer, this will be a very inexpensive and compact way to do Arduino development. Stay tuned!
SeeedStudio continues to impress us with he Grove line of Arduino/Pi/microcontroller compatible plug-in modules. Here's a fresh batch for today's product announcements.
We are excited to announce that it is now official - we are going to the MakerFaire Bay Area! Solarbotics will be in the Maker Shed May 17 & 18, 2014 with some brand new product. Come check it out if you are around.
We're sorry to report that Mr. Bilton of Technology Index has informed us that his popular UK webstore is shut down due to circumstances not having to do with its business. We hope things work out for Mr. Bilton, and that Technology Index will reopen for business when things get better.
We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready. Project One: The GVS Shield We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.