What's on the burner...

Dave Hrynkiw
November 17, 2009

We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready.

Solarbotics GVS ShieldProject One: The GVS Shield

We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a handy pinout "Ground / Vcc / Signal", which also describes most servo interfaces. It's turning into the general standard for most dedicated interfaces. So, to make use of these with an Arduino, we've put together our own GVS Shield.

We could have made it with a simple 3-row x  18 block of male pins, but that wouldn't fit the locking buckle-type connectors found on many Phidget and other accessory items. We're using nicely space, proper shielded pin plugs. Here are some design highlights:

  • D1, D2, Gnd pin connector for serial I/O
  • D2-D12 right-facing plugs
  • A0-A5 left-facing connection buckled plugs
  • Three 0.1µF decoupling capacitors
  • One 330µF electrolytic surge capacitor
  • "BlinkM" compatible I2C plug (shared with A4/A5 plugs)
  • Pin 13 LED & Reset brought up from main board

Arduino - very small!Project 2: The Ardweeny!

Yes, the name was a challenge. They didn't think I'd have the guts to follow through with the name, but it's just so suitable.

Our trial of the One-Chip ArduinoThis project is inspired by Kimio Kosaka's One Chip Arduino project, where he jams all the parts for an Arduino on top of the IC, and just plugs the IC into the breadboard directly.

This is an Arduino PCB designed reverse to most others. Instead of mounting the IC to the board, we're mounting the board to the IC (let me clarify...).

Put all the stuff on the top. Install looong leads through the rows on the outside edge. Jamb your ATMega328 in from the underside so the chip leads are pointing down, in the same direction os the long leads. Tack solder the chip leads to the long leads. Or not, if you think friction fit works.

Prototype ArdweenyDepending how you soldered the ATmega to the pins, you can either make it fit a 0.3" space header (where it straddles the breadboard centerline perfectly) or 0.4" wide (where it straddles the breadboard centerline, but uses up 1 extra empty hole next to the centerline).

Besides needing an FTDI cable, or SparkFun-like USB adapter/programmer, this will be a very inexpensive and compact way to do Arduino development. Stay tuned!

MORE POSTS

November 3, 2005
New Catalog!

8th Edition is online! Get it here, or under the "Resources" tab - it's on the top bar.

February 23, 2018
New Product: WeMos

WeMos D1 Mini - 4MB Microcontroller $9.85CAD / $7.95USD  The WeMos D1 Mini makes working with the ESP8266 module simple! Breadboard compatible and equipped with a microUSB jack, build your next Internet of Things project in a snap. ProtoBoard Shield for WeMos D1 mini $4.39CAD / $3.50USD A prototyping area that comes with headers you […]

March 30, 2011
No, it isn't $30...

Sorry about that. The last ad for the ARDX Experimenter's Kit for Arduino? Wrong. Our graphics designer, Chris (yes, I'll give credit where credit is due) used an old template for our latest Servo Advertisement, and didn't change the price. No, it's not $30 - it's still $84.95USD. And continuing the blame-game, I gave him […]

December 23, 2004
Solarbotics Holiday Schedule

Solarbotics will be slightly altering our holiday hours to enable staff to spend time with friends & family. We will be closed Friday, December 24th to Tuesday, December 28th and Friday, December the 31st. On Monday, January 3rd, 2005 we will resume our normal hours, 9:00am - 6:00pm MST. Solarbotics wishes all the best to […]

1 15 16 17 18 19 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.