Due to the unusual circumstance of several large volume orders coming through, SolarSpeeders are sold out! Our apologies - we're working on getting more together ASAP. Hopefully by the end of July.
Programming an ESP0-01 (or any other ESP8266 variant) can be a bit of a button-toggling dance even after you get it wired up correctly. This handy little module makes it so much easier, by making completely buttonless and comes with a usb connector as well! Plug in your ESP-01 and use the standard ESP toolchain to do the programming. Just flip the switch to "prog" and start the programming procedure.
You'll definitely want one of these if you've ever had to breadboard a quicky-programmer adapter for these more than once!
Specifications:
Interface a lithium battery to your WeMos D1 Mini using this convenient battery charging shield! It comes equipped with a 1A lithium battery charger and 5V, 1A boost regulator for all of your power management needs. It is specifically designed for the WeMos mini and mini Pro ESP8266 based development boards. This shield includes two Male 8 pin headers.
Specifications:
This push button has a very satisfying tactile "click" and is a great place to start if you need a simple interface for your WeMos module.
Specifications:
Pinout:
Add a micro SD card to your WeMos D1 Mini with this shield to increase your usable storage. This is excellent for storing stuff such as web pages, music or image files, or really anything you need to load or save that doesn't fit into the 4Mb onboard storage. It is specifically designed for the WeMos mini and mini Pro ESP8266 based development boards. This shield includes two Male 8 pin headers.
Specifications:
Pinout:
Screws. Yes, Screws. Small, METRIC screws. Because these are hard to find, especially in Calgary. So we took matters into our own hands, bought waaay to many, and now we're selling the extra...
Again, YES, screws. For the aforementioned reasons above (and there's more to come!)
Small metric hardware: M3 x 16MM pan-head Screws, Package of 10
Due to the unusual circumstance of several large volume orders coming through, SolarSpeeders are sold out! Our apologies - we're working on getting more together ASAP. Hopefully by the end of July.
So, I writes this book, see? And it sells pretty good, so in November, I orders more books, see? And they says "HEY! We gots none left - calm down, we're printing more". So, I sits and waits, and FINALLY they comes in! Here's the great part: It looks like this is the new printing, […]
Grant McKee has been working hard using BEPs in a good many applications around the office, so we've got him to put together a simple application of the BEP - the Pummer nocturnal Strobe. We'll be posting other BEP applications under the 'Special Projects' gallery, so check back once in a while!
Seeed Grove - Digital Light Sensor $9.90 This module is based on the I2C light-to-digital converter TSL2561. Grove - DMX512 $4.90 Interface Grove to DMX512 for control of stage lighting and effects. Grove - Temperature & Humidity Pro Sensor $14.90 For more precise environmental measurements using the Grove system. Grove - Recorder $17.95 Grove record […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.