It's pretty amazing to see the adoption rate of 3D printers in the last few years, and the kind of creativity they bring out in people. I've seen quite a few variations, particularly while walking through the 3D printer villages at the MakerFaires I've already attended (either as a vendor or just a visitor), but […]
Wednesday Links: Pulse Jacket, Wassilisc...
Solar botics
January 30, 2014
Today I wanted to share a how-to of one of my projects with you. So once I had some cats. And an extra apple tree. And I wanted to be noticed in the dark. So I made some fruit batteries out of apples and attached them to the running jacket. This way I could burn more calories with the added weight while I run, and have a snack on the go (don’t eat the copper or crack a tooth on the nail if you decide to repeat my project).
|
Pulse Jacket In line with all the wearable technology craze, this Pulse Jacket by Miria Grunick is a great application. It reacts to heart rate while you run and makes you visible to all the nighttime traffic. (Via Hackaday) |
 |
Long Exposures and Fruit Batteries There's something cool (or poetic) about illuminating long exposure photographs of fruit with the light that they generate. By Caleb Charland, via Colossal. |
 |
Soil Moisture Sensor Monitor the soil moisture using only nails and little bit of electronic ingenuity, by Manoel Ramon, via Arduino blog. |
 |
Light Transformed into Sound Wassiliscope, a device called after Wassily Kandinsky, turns light into sound in real time. Can see all the practical applications for it. By Christopher Yamane, via Designboom. |
 |
Robotic Whiskers Now this is the cutest robotic application so far, introducing Shrewbot the whiskerbearer, and the second generation - e-whiskers. (via IEEE Spectrum) |
And what about cats, you would ask. In this case cats don’t have any practical application, they are there for attention grabbing purposes only.
MORE POSTS
Wheee! They're here - the new RW2!
We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
BEP Application: Pummer
The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
Monday New Product: Enclosures, FeatherW...
Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is designed to protect the PhdgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure. Acrylic Enclosure for the 1014 Interface Kit 0/0/4 $11.50 Acrylic Enclosure for Phidget Interface Kit (#3802) DC Motor + Stepper FeatherWing Add-on […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.