The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Wednesday Links: Pulse Jacket, Wassilisc...
Solar botics
January 30, 2014
Today I wanted to share a how-to of one of my projects with you. So once I had some cats. And an extra apple tree. And I wanted to be noticed in the dark. So I made some fruit batteries out of apples and attached them to the running jacket. This way I could burn more calories with the added weight while I run, and have a snack on the go (don’t eat the copper or crack a tooth on the nail if you decide to repeat my project).
|
Pulse Jacket In line with all the wearable technology craze, this Pulse Jacket by Miria Grunick is a great application. It reacts to heart rate while you run and makes you visible to all the nighttime traffic. (Via Hackaday) |
 |
Long Exposures and Fruit Batteries There's something cool (or poetic) about illuminating long exposure photographs of fruit with the light that they generate. By Caleb Charland, via Colossal. |
 |
Soil Moisture Sensor Monitor the soil moisture using only nails and little bit of electronic ingenuity, by Manoel Ramon, via Arduino blog. |
 |
Light Transformed into Sound Wassiliscope, a device called after Wassily Kandinsky, turns light into sound in real time. Can see all the practical applications for it. By Christopher Yamane, via Designboom. |
 |
Robotic Whiskers Now this is the cutest robotic application so far, introducing Shrewbot the whiskerbearer, and the second generation - e-whiskers. (via IEEE Spectrum) |
And what about cats, you would ask. In this case cats don’t have any practical application, they are there for attention grabbing purposes only.
MORE POSTS
BEP Application: Servocore Walker
Vancouver BEAM Workshop
Here's a few links to a workshop spear-headed by ScottyDogma in Vancouver, B.C. Some impressive work done using servos, BIOBug motors, some wooden spacer blocks and lots of soldering! Nice job, guys. Pics and movies: http://www3.telus.net/dogmabots Full Size (1344 x 1008, 500-700K) http://www.davehylands.com/VRC-BEAM-Workshop/index.html Half-Size (672 x 504, 100-150K) http://www.davehylands.com/VRC-BEAM-Workshop/Thumb-B/index.html
Wednesday Links: MarshmallowMatic, Etch ...
So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam […]
Sundancer review
Canada Computes has just run a web-review of our Sunancer Butterfly kit. Read More...
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.