We've been getting requests for the parts bundles as mentioned in Gareth Branwyn's book 'Absolute Beginner's Guide to Building Robots'. We're sorry to say that we don't have them ready yet (major website development takes up staff man-hours), so please bear with us - we're working towards having something together. And no, we don't have […]
Wednesday Links: Pulse Jacket, Wassilisc...
Solar botics
January 30, 2014
Today I wanted to share a how-to of one of my projects with you. So once I had some cats. And an extra apple tree. And I wanted to be noticed in the dark. So I made some fruit batteries out of apples and attached them to the running jacket. This way I could burn more calories with the added weight while I run, and have a snack on the go (don’t eat the copper or crack a tooth on the nail if you decide to repeat my project).
|
Pulse Jacket In line with all the wearable technology craze, this Pulse Jacket by Miria Grunick is a great application. It reacts to heart rate while you run and makes you visible to all the nighttime traffic. (Via Hackaday) |
 |
Long Exposures and Fruit Batteries There's something cool (or poetic) about illuminating long exposure photographs of fruit with the light that they generate. By Caleb Charland, via Colossal. |
 |
Soil Moisture Sensor Monitor the soil moisture using only nails and little bit of electronic ingenuity, by Manoel Ramon, via Arduino blog. |
 |
Light Transformed into Sound Wassiliscope, a device called after Wassily Kandinsky, turns light into sound in real time. Can see all the practical applications for it. By Christopher Yamane, via Designboom. |
 |
Robotic Whiskers Now this is the cutest robotic application so far, introducing Shrewbot the whiskerbearer, and the second generation - e-whiskers. (via IEEE Spectrum) |
And what about cats, you would ask. In this case cats don’t have any practical application, they are there for attention grabbing purposes only.
MORE POSTS
Arduino Extravaganza
Hm, now there's something that'd be difficult to say five times fast. You should've seen me try to type it - it was atrocious. But I digress - we have a big announcement to make. We've decided to bring our entire catalogue of Arduino/Freeduino products to Solarbotics. This covers the Boards Themselves, Parts Bundles, Shields, […]
Sumovore Captures 1st at NAIT
From the BEAM mailing list, we're happy to report that Tom Gray managed to win 1st at the NAIT robotics challenge in Edmonton!: "Thanks again to all who endured my wails and made helpful suggestions earlier this year when I couldn't get my BS2 brained Sumovore to run. " "Grant M. of Solarbotics finally traced […]
Solarbotics Raspberry Pi 3 SAFE Assembly...
The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.