Hey! Are you in Calgary? Are you near Calgary? Is your name Calgary? If you answered yes to any of the first two questions (but not the third one - that's just plain weird), then you might be interested in hearing about the Mini Maker Faire that's happening here in the city tomorrow. From 10am […]
Wednesday Links: MarshmallowMatic, Etch ...
Solar botics
April 2, 2014
So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.
|
Smiley Face Screws by Yuma Kano This needs to be a standard, eventually expanding the range of screws to :< (sad), ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal) |
 |
MarshMallowMatic Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo) |
 |
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo) |
 |
Japan gets serious about 3D printing using titanium Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com) |
 |
Bionic Kangaroo Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum) |
So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!
MORE POSTS
Escaps back in stock!
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
Solarbotics goes to San Francisco!
Solarbotics recently sent a representative to the Robot Society of America's Robot Expo in San Francisco. Wanna see some pics? Check them out here at http://www.solarbotics.net/gallery/SanFranciscoRSA.
GM15s back in stock!
Sorry about the delay in making these available. These tiny 25:1 pager-sized gear motors are difficult to get built. BUT, we finally have more GM15 gearmotors in stock!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.