Wednesday Links: MarshmallowMatic, Etch ...

Solar botics
April 2, 2014

So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.

Smiley Face Screws by Yuma Kano
This needs to be a standard, eventually expanding the range of screws to :< (sad)ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal)
MarshMallowMatic
Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo)
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent
Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo)
Japan gets serious about 3D printing using titanium
Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com)
Bionic Kangaroo
Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum)

So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!

MORE POSTS

February 13, 2009
Closed on Monday (the 16th) for Family D...

We will be so emotionally moved by the celebration of GPS Day tomorrow (the 14th) that we'll be taking Monday, February 16th off to recuperate. Go ahead and place orders or send emails - we'll get right back to you and continue shipping on Tuesday when we resume all business as usual. If you want […]

October 18, 2013
New Product Friday: GSM Shield, Conducti...

Well today we are presenting things! Here's how they work. GSM shield comes supplied with a sticker that you can draw a little arrow on it, and then you mount the shield on a stick, and it will show the direction of where you have to go. To set the direction whisper your exact latitude […]

July 22, 2016
New Product: Microcontrollers & Ras...

SparkFun Electric Imp Breakout $17.48 The SparkFun Electric Imp breakout board makes it easy to experiment with your Electric Imp IoT project. ESP-12F AP+STA Remote Serial Port WIFI Controller / Module $9.38 The ESP8266 (ESP-12F AP+STA) is a nice "Internet of Things" microcontroller with Wifi (or as a Wifi bridge for your project) Adafruit Metro […]

September 21, 2006
New Vibe Motors!

We've finally come upon a suitable replacment for the venerable, discontinued VPM vibrating pager disk motor. Ah, it was a splendid device, but it sure was easy to break those motor leads... Ah! But the new VPM2 has wires prebonded to the motor, and it's slightly smaller too! We welcome our new vibrating disk motor […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.