Wednesday Links: MarshmallowMatic, Etch ...

Solar botics
April 2, 2014

So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.

Smiley Face Screws by Yuma Kano
This needs to be a standard, eventually expanding the range of screws to :< (sad)ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal)
MarshMallowMatic
Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo)
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent
Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo)
Japan gets serious about 3D printing using titanium
Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com)
Bionic Kangaroo
Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum)

So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!

MORE POSTS

August 25, 2016
New Product: LEDs & Wire

Individually mounted WS2812B LED - Black or White $1.62 Super-tightly PCB-mounted WS2812B addressable LEDs, available in white or black trim. SuperFlex Wire 6M on Bobbin $5.85 This 6M bobbin of 26AWG Superflex wire is a soft and supple, ideal for wearable technology. Superflex 4.5m 90 LED Strand, 5cm Spacing $6.28 90 tiny LEDs of various […]

January 10, 2014
New Product Friday: Arduino Yun and Thre...

Today is Friday. Lets celebrate by using only green towels and omitting the letter R. Or just seeing what new stuff we got: Arduino Yun $71.95 Take a wireless router-on-a-chip, and stick an Arduino Leonardo to it - that's the new Arduino YUN! Evil Mad Science The Three Fives Kit $35.00 Take a venerable 555 […]

July 12, 2007
BEP Application: Turbot

The Turbot is a member of the Scophthalmidae family of flatfish and is almost completely circular. Turbot is often found partially buried in the seabed in sand, gravel, rocks and sediment. Its fat content varies, but it usually contains roughly 1 gram of omega-3 fatty acids per 100g fillet. Barring advances in genetic engineering, we will not be building that kind of Turbot. However, this kind of Turbot can be built with a soldering iron.

April 9, 2010
Weekend Tidbits

Being April in Calgary, it should come as no surprise to any of you that yesterday we had a lovely blizzard which melted and froze, coating everything in a delicious layer of ice. This, of course, is somehow connected to the fact that Solarbotics El Presidante, Dave, is currently in Las Vegas where it is […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart