We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw […]
Wednesday Links: MarshmallowMatic, Etch ...
Solar botics
April 2, 2014
So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.
|
Smiley Face Screws by Yuma Kano This needs to be a standard, eventually expanding the range of screws to :< (sad), ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal) |
 |
MarshMallowMatic Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo) |
 |
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo) |
 |
Japan gets serious about 3D printing using titanium Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com) |
 |
Bionic Kangaroo Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum) |
So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!
MORE POSTS
New GM11-14 mounting screws
BOY those are strange little screws on the face of the GM11-14 series of gear motors! 1.7mm diameter x 0.35mm thread pitch ain't a common bolt, but we found some 4mm long that we've made available for those of you looking for a precision method of mounting the motors. Check out part M1.7x0.35!
Friday New Product: BusBoard Protoboards
Wee, more protoboards! Now this is the last batch, we don't got no more. Next time it will be something else, I promise. PadBoard-1 Pad-per-Hole, 80x50mm Solder Protoboard $3.75 A tight and tidy one-pad-per-hole, plated-through, double-sided board. Ideal for wildly-wired, small projects! PadBoard-2, Pad-Per-Hole, 80x100mm Solder Protoboard $6.82 For the ultimate in protoboard flexibility, here's […]
SparkFun hates robots.
We love SparkFun. Great group of people. Excellent products. It's just that they're... well... twisted and cruel. You see their RoboJoust event? We didn't take them serious when they said it was to be performed 4' off a concrete floor. But here's the proof. They're actually building the table that high off the ground. Next […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.