Here's a funky motor for you - the GM19! Slightly larger than the other metal gearhead series (GM11-14), and with a larger motor, this 35:1 beasty looks like a good contender for building mini-sumos or other small, speed-hungry robots! But be warned: It is a bit strange. The gearhead is mounted askew to the motor, […]
Wednesday Links: MarshmallowMatic, Etch ...
Solar botics
April 2, 2014
So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.
|
Smiley Face Screws by Yuma Kano This needs to be a standard, eventually expanding the range of screws to :< (sad), ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal) |
 |
MarshMallowMatic Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo) |
 |
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo) |
 |
Japan gets serious about 3D printing using titanium Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com) |
 |
Bionic Kangaroo Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum) |
So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!
MORE POSTS
Evil Mad Scientist Inventory... Welcome ...
Earlier in January we had a very interesting discussion with the chief geeks at Evil Mad Scientist Labs. They've been doing similarly-unique DIY as Solarbotics for a good long time, but they had now found themselves in the position of shuttering their operation to take some lead rolls with Bantam Tools. This meant moving from […]
"Steady as she goes, steersman..."
Solarbotics / HVWTech will be on "maintenance mode" while the bulk of the staff go down to the MAKE Faire in San Mateo, California. The remaining staff have begged for some relief to make the week go easier, so we are not going to be doing any UPS shipments until Monday, May 21. And don't […]
BIG Solar cars in Calgary tomorrow!
The America Solar Challenge finishes here in Calgary tomorrow (July 27) betweein 11 and 3:30pm! The teams are coming up over McKnight Blvd., which isn't far from our offices. We'll be out watching them go by for a few hours tomorrow, so if the phones don't get answered for a bit, you'll know why. Go […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.