Our GM2 gearmotors are powerful, and just a bit slower than a standard servo, making them ideal for a walker. But for you folks who like wheeled robots, these are simply too slow. Solarbotics' own Grant McKee to the rescue! We barely had the motors opened 10 minutes before Grant figured out that these motors […]
Wednesday Links: MarshmallowMatic, Etch ...
Solar botics
April 2, 2014
So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.
|
Smiley Face Screws by Yuma Kano This needs to be a standard, eventually expanding the range of screws to :< (sad), ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal) |
 |
MarshMallowMatic Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo) |
 |
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo) |
 |
Japan gets serious about 3D printing using titanium Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com) |
 |
Bionic Kangaroo Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum) |
So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!
MORE POSTS
Tuesday New Product: Batteries, Pi Wedge...
Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! 3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. SparkFun Pi Wedge B+ $9.55 A prototyping Wedge for Raspberry Pi B+ that allows you to use a shield and a protoboard […]
More of the RS2 and Friends at CES
I just tripped over this article showing off some AMAZING footage of Mark's new creations. Enjoy! Read More...
Heritage Day Monday
Monday is Heritage Day here in Alberta, Canada, so we will all be out Heritage-ing it up, and enjoying our all too short summer. So if you want to go all Heritage on BEAM, and buy a SolarRoller kit, we'll ship it to you when we are back in the office Tuesday!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.