Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]
Wednesday Links: MarshmallowMatic, Etch ...
Solar botics
April 2, 2014
So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.
|
Smiley Face Screws by Yuma Kano This needs to be a standard, eventually expanding the range of screws to :< (sad), ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal) |
 |
MarshMallowMatic Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo) |
 |
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo) |
 |
Japan gets serious about 3D printing using titanium Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com) |
 |
Bionic Kangaroo Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum) |
So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!
MORE POSTS
Eastern Canadian Robot Games Results
Yes, the Eastern Canadian Robot Games have been over for about a month, but I still think the following is worth mentioning: The Solarbotics Sumovore won first place in beginner mini-sumo The Solarbotics ScoutWalker III won first and third in the Walker competition Our own Grant McKee won Advanced Minisumo with his own design "Ender's […]
KISS and Show n' Tell
Herbie the Mousebot, that lovable robotic rodent of ours, is a pretty popular critter. Seeks light, avoids obstacles, chases other Herbies (when modified), and is generally a swell robo mus musculus. He doesn't whistle and can't quite drive a steamboat like certain other mice, but he's gets by alright. What most people probably don't know about […]
Solarbotics Raspberry Pi 3 SAFE Assembly...
The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.