Wednesday Links: MarshmallowMatic, Etch ...

Solar botics
April 2, 2014

So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.

Smiley Face Screws by Yuma Kano
This needs to be a standard, eventually expanding the range of screws to :< (sad)ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal)
MarshMallowMatic
Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo)
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent
Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo)
Japan gets serious about 3D printing using titanium
Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com)
Bionic Kangaroo
Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum)

So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!

MORE POSTS

April 11, 2005
Sumovore Line-follower

This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...

July 13, 2012
Introducting the CMDR Shield for Arduino

Last week we beefed up the Ardweeny with the Multipack, and this week we're turning out attention to the Arduino. We've just released the CMDR (Compact Motor Driver) Shield, which lets you bi-directionally drive two gear motors or a single stepper motor, read 6 analog sensors, and control up to 8 servos all at the […]

July 8, 2011
Arduino & LoL Shield Pong, New Prod...

Have we all had our fill of Maple syrup and/or fireworks? With Canada Day and Independence Day behind us, we can get on with our regularly scheduled "look at all the new stuff we've brought in" programming. Truth be told, today is actually the start of the Calgary Stampede. Apparently, that's a pretty big deal […]

June 29, 2001
Closed for Canada Day

We are closed for Canada Day, July 1st and the following day. We are sorry for any inconveniences, we will reopen on July 3rd and will be open for the rest of the week. We will be open on Independence Day July 4th. Happy Canada Day! Read More...

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart