Every year a group of my friends have an engineering Secret Santa. The rules are simple: make something cool for under $20 that requires engineering to complete. In years past we’ve seen Google cardboard VR headsets that are 6DOF, match stick rockets, 3D printed fans that explode when used, 3D printed rockets with cardboard launch […]
Wednesday Links: Flying Jellyfish Robot,...
Solar botics
February 19, 2014
Now, one things got my attention in today's links: aerojelly. Wouldn’t you like to have a pet aerojelly? It flaps, it flies, it comes with a leash, which is a power cord at the same time. The rest of links is accessories that include music for aerojelly, wireless LEDs for aerojelly, and a pack of termite swarm robot friends for aerojelly.
|
The "Face" Part of the Interface Talk about wearable - electronics getting small enough to act as facial decoration and react to facial expressions (Kinisi by Katia Vega, via Arduino blog). |
 |
Tiny Robot Flies Like a Jellyfish Only 8 cm in length, extremely lightweight and ingeniously simple build, the robot is keeping stable in the air without tipping over (by Leif Ristroph, via Livescience) |
 |
Movable Wireless LED technology Who doesn't like blinky light? We do. Simple but effective (and well-documented) (By cohda, via Designboom) |
 |
Under Water Record Player Would be awesome to know how the waterproofing was done on this curious device... (by Evan Holm, via Hackaday) |
 |
TERMES Robots Project Robots behaviour algorithm was based on termites to autonomously and collectively produce desired structures (via IEEE Spectrum). |
Not sure how the LED makeup fits into the picture though…
MORE POSTS
Canada Post Web Services Interruption
Due to scheduled maintenance by Canada Post on their Shipping and Tracking Web Services page we will be unable to provide shipping estimates between 7pm MDT on Saturday, June 11 and 12am MDT on Sunday, June 12. We apologize for any inconvenience this may cause.
Strange set of Atmel '328 ICs...
Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches. The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips. We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, […]
SCC3733 Solarcell hacking
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.