Yes, it's true. After years of working our fingers to the bone inserting jumper wires on breadboards to make unusually robust controllers for robots out of discrete & logic chip elements, Solarbotics has seen the light! We've put on our eye-patch, hoisted the jolly-roger, and swung along-side to board the HMS HVWTech.com ! That's right […]
Wednesday Cool Links: Spiderbot, Solar S...
Dave Hrynkiw
October 17, 2012
It's Wednesday! Hooray! Huzzah! We're celebrating because... Well, ok, we have nothing big to celebrate right now. So we're going to celebrate having nothing to celebrate with the traditional and only appropriate way possible... BROWSING THE INTERNET! Indeed, we've been celebrating this time-honoured tradition with steadfast dedication, and it's our pleasure to share it with all of you.
|
Four-Legged Spiderbot As the website puts it, this is "a walking machine, radially symmetrical, having four legs with two degrees of freedom each, controlled through a wireless link from a hand-held controller based on two Wii Nunchucks." Very impressive articulation and range of motion. Be sure to check out the video. |
 |
The Almost Useless Machine A solar-powered... Reciprocating saw? Make sure you have lots of patience and a cold one to enjoy while you "work"! Seriously though, while this might not be too functional, it certainly has some great craftsmanship. |
 |
Solar "Death Ray": Power of 5000 suns! Mirrors. Lots of mirrors. 5800 of them, to be precise. It's pretty cool (and a LOT scary) what kind of power can be harnessed by arranging mirrors onto a fiberglass satellite dish and aligning it to the sun. |
 |
6 Rubens Tubes Visualizer Hrm, a flame visualization for music? SIGN ME UP. Turn it into a handy-dandy plug-in accessory for the iPod, for the best on-the-go pyrotechnics you can possibly imagine. Might want to make sure you turn it off before tucking it away in your pocket, though. |
 |
Solar Engineer Badge on DIY So, you think you like DIY? Well, it's time to prove your chops by completing challenges over at diy.org. They even have a Solar Engineer Badge that features a bunch of project ideas, including our Instructable for the Solar Powered Miniball. |
We were once hoping that we could instead celebrate by racing giraffes through obstacle courses, but that didn't pan out. Too bad. I was planning on decking mine out with some sweet black and white racing stripes, to make it look like a very oddly proportioned zebra.
MORE POSTS
New Product: WeMos
WeMos D1 Mini - 4MB Microcontroller $9.85CAD / $7.95USD The WeMos D1 Mini makes working with the ESP8266 module simple! Breadboard compatible and equipped with a microUSB jack, build your next Internet of Things project in a snap. ProtoBoard Shield for WeMos D1 mini $4.39CAD / $3.50USD A prototyping area that comes with headers you […]
Calgary Mini Maker Faire
... is over and it has been great. The weather cooperated, TelusSpark Science Centre grounds cooperated, squirrels cooperated, people checking out our booth were awesome, every single one of them. Check out some photos of the event on our Flickr stream. And our Marble Machine got featured in this great video by Paul Spenard: Not […]
Make 06 Trimet
Eric L. was so kind as to send us a link to a video of his Make 06 Trimet on YouTube. If you want to build your very own Trimet you can get all the parts here, and if you don't have the magazine, you can buy it here. Order both together and get 10% […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.