Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is designed to protect the PhdgetInterfaceKit 8/8/8 while giving you access to all terminals and connectors through openings in the enclosure. Acrylic Enclosure for the 1014 Interface Kit 0/0/4 $11.50 Acrylic Enclosure for Phidget Interface Kit (#3802) DC Motor + Stepper FeatherWing Add-on […]
Wednesday Cool Links: Spiderbot, Solar S...
Dave Hrynkiw
October 17, 2012
It's Wednesday! Hooray! Huzzah! We're celebrating because... Well, ok, we have nothing big to celebrate right now. So we're going to celebrate having nothing to celebrate with the traditional and only appropriate way possible... BROWSING THE INTERNET! Indeed, we've been celebrating this time-honoured tradition with steadfast dedication, and it's our pleasure to share it with all of you.
|
Four-Legged Spiderbot As the website puts it, this is "a walking machine, radially symmetrical, having four legs with two degrees of freedom each, controlled through a wireless link from a hand-held controller based on two Wii Nunchucks." Very impressive articulation and range of motion. Be sure to check out the video. |
 |
The Almost Useless Machine A solar-powered... Reciprocating saw? Make sure you have lots of patience and a cold one to enjoy while you "work"! Seriously though, while this might not be too functional, it certainly has some great craftsmanship. |
 |
Solar "Death Ray": Power of 5000 suns! Mirrors. Lots of mirrors. 5800 of them, to be precise. It's pretty cool (and a LOT scary) what kind of power can be harnessed by arranging mirrors onto a fiberglass satellite dish and aligning it to the sun. |
 |
6 Rubens Tubes Visualizer Hrm, a flame visualization for music? SIGN ME UP. Turn it into a handy-dandy plug-in accessory for the iPod, for the best on-the-go pyrotechnics you can possibly imagine. Might want to make sure you turn it off before tucking it away in your pocket, though. |
 |
Solar Engineer Badge on DIY So, you think you like DIY? Well, it's time to prove your chops by completing challenges over at diy.org. They even have a Solar Engineer Badge that features a bunch of project ideas, including our Instructable for the Solar Powered Miniball. |
We were once hoping that we could instead celebrate by racing giraffes through obstacle courses, but that didn't pan out. Too bad. I was planning on decking mine out with some sweet black and white racing stripes, to make it look like a very oddly proportioned zebra.
MORE POSTS
Herbie Reviewed
Here's a link from Gareth Branwyn at Streettech for his review of our new Herbie the Mousebot Kit!
New Product Friday: GSM Shield, Conducti...
Well today we are presenting things! Here's how they work. GSM shield comes supplied with a sticker that you can draw a little arrow on it, and then you mount the shield on a stick, and it will show the direction of where you have to go. To set the direction whisper your exact latitude […]
BEP Application: Servocore Walker
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.