Wednesday Cool Links: Spiderbot, Solar S...

Dave Hrynkiw
October 17, 2012

It's Wednesday! Hooray! Huzzah! We're celebrating because... Well, ok, we have nothing big to celebrate right now. So we're going to celebrate having nothing to celebrate with the traditional and only appropriate way possible... BROWSING THE INTERNET! Indeed, we've been celebrating this time-honoured tradition with steadfast dedication, and it's our pleasure to share it with all of you.

Four-Legged Spiderbot
As the website puts it, this is "a walking machine, radially symmetrical, having four legs with two degrees of freedom each, controlled through a wireless link from a hand-held controller based on two Wii Nunchucks." Very impressive articulation and range of motion. Be sure to check out the video.
The Almost Useless Machine
A solar-powered... Reciprocating saw? Make sure you have lots of patience and a cold one to enjoy while you "work"! Seriously though, while this might not be too functional, it certainly has some great craftsmanship.
Solar "Death Ray": Power of 5000 suns!
Mirrors. Lots of mirrors. 5800 of them, to be precise. It's pretty cool (and a LOT scary) what kind of power can be harnessed by arranging mirrors onto a fiberglass satellite dish and aligning it to the sun.
6 Rubens Tubes Visualizer
Hrm, a flame visualization for music? SIGN ME UP. Turn it into a handy-dandy plug-in accessory for the iPod, for the best on-the-go pyrotechnics you can possibly imagine. Might want to make sure you turn it off before tucking it away in your pocket, though.
Solar Engineer Badge on DIY
So, you think you like DIY? Well, it's time to prove your chops by completing challenges over at diy.org. They even have a Solar Engineer Badge that features a bunch of project ideas, including our Instructable for the Solar Powered Miniball.

We were once hoping that we could instead celebrate by racing giraffes through obstacle courses, but that didn't pan out. Too bad. I was planning on decking mine out with some sweet black and white racing stripes, to make it look like a very oddly proportioned zebra.

MORE POSTS

January 11, 2017
Heated Car Seat Teardown and Repair

Here's a little makeover of an inexpensive aftermarket car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to harsh […]

July 12, 2007
BEP Application: Wilf Rigter Solar Power...

The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.

March 19, 2014
Wednesday Links: Flashlights, Lanternbot...

Spring this year seems to be short on sunshine. To compensate for that, today's post is full of shiny things. And butterflies. Butterflies are always a good addition. Tilt Beam Flashlight Cute build, a diffuser of some sort would be a nice addition though, unless used for interrogation purposes. (by [Zach DeBord], via Hackaday) Soft […]

August 31, 2016
New Product: Sensors

Seeed Grove - IMU 9DOF V2 $18.23 The Grove 9 degree-of-freedom (DOF) module features the MPU-9250, and is an easy-to-use all in one module from SeeedStudios. Teensy Prop Shield LC $13.00 The Prop Shield LC is the stripped-down version of the Teensy Prop Sensor Shield (motion sensors removed) Prop Shield With Motion Sensors $27.00 The […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.