We are back to out regular Wednesday Cool Links, and to celebrate this occasion, we are treating you with more Wednesday Cool Links. I know, pretty original, right? Grant Imahara gets a taco by copter at RoboGames 2013 (Video) While RoboGames is an exciting event as is, being attacked by taco-slinging Hex-copters is a whole […]
Wednesday Cool Links: Spiderbot, Solar S...
Dave Hrynkiw
October 17, 2012
It's Wednesday! Hooray! Huzzah! We're celebrating because... Well, ok, we have nothing big to celebrate right now. So we're going to celebrate having nothing to celebrate with the traditional and only appropriate way possible... BROWSING THE INTERNET! Indeed, we've been celebrating this time-honoured tradition with steadfast dedication, and it's our pleasure to share it with all of you.
|
Four-Legged Spiderbot As the website puts it, this is "a walking machine, radially symmetrical, having four legs with two degrees of freedom each, controlled through a wireless link from a hand-held controller based on two Wii Nunchucks." Very impressive articulation and range of motion. Be sure to check out the video. |
 |
The Almost Useless Machine A solar-powered... Reciprocating saw? Make sure you have lots of patience and a cold one to enjoy while you "work"! Seriously though, while this might not be too functional, it certainly has some great craftsmanship. |
 |
Solar "Death Ray": Power of 5000 suns! Mirrors. Lots of mirrors. 5800 of them, to be precise. It's pretty cool (and a LOT scary) what kind of power can be harnessed by arranging mirrors onto a fiberglass satellite dish and aligning it to the sun. |
 |
6 Rubens Tubes Visualizer Hrm, a flame visualization for music? SIGN ME UP. Turn it into a handy-dandy plug-in accessory for the iPod, for the best on-the-go pyrotechnics you can possibly imagine. Might want to make sure you turn it off before tucking it away in your pocket, though. |
 |
Solar Engineer Badge on DIY So, you think you like DIY? Well, it's time to prove your chops by completing challenges over at diy.org. They even have a Solar Engineer Badge that features a bunch of project ideas, including our Instructable for the Solar Powered Miniball. |
We were once hoping that we could instead celebrate by racing giraffes through obstacle courses, but that didn't pan out. Too bad. I was planning on decking mine out with some sweet black and white racing stripes, to make it look like a very oddly proportioned zebra.
MORE POSTS
I see the light!
When winter settles in around these parts, daylight doesn't seem to last too long. So like moths we tend to get excited about the new bright and shiny toys we bring in. Today we have Super Bright LEDs - they're the nifty little units we put in the HexPummer Lantern to create that extra pulse […]
3D Printed Treetop Star
Initially inspired by the Moravian Star on Instructables and the fact that we now carry all kinds of 3D printing filament, we decided to make one of our own glowy holiday star. We have used this thing as source files to create a similar treetop decoration of our own. After some trial and error (due […]
Project Monday: The Story of SharkBot
Not every product we design is destined to make it to the consumer. Sometimes a great idea gets taken to completion before we realize that one factor or another dooms it to an existence in our failed project bin. One such project that now lives a watery grave is the Sharkbot. Akin to our much […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.