A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out: We briefly toyed with the idea […]
Wednesday Cool Links: Spiderbot, Solar S...
Dave Hrynkiw
October 17, 2012
It's Wednesday! Hooray! Huzzah! We're celebrating because... Well, ok, we have nothing big to celebrate right now. So we're going to celebrate having nothing to celebrate with the traditional and only appropriate way possible... BROWSING THE INTERNET! Indeed, we've been celebrating this time-honoured tradition with steadfast dedication, and it's our pleasure to share it with all of you.
|
Four-Legged Spiderbot As the website puts it, this is "a walking machine, radially symmetrical, having four legs with two degrees of freedom each, controlled through a wireless link from a hand-held controller based on two Wii Nunchucks." Very impressive articulation and range of motion. Be sure to check out the video. |
 |
The Almost Useless Machine A solar-powered... Reciprocating saw? Make sure you have lots of patience and a cold one to enjoy while you "work"! Seriously though, while this might not be too functional, it certainly has some great craftsmanship. |
 |
Solar "Death Ray": Power of 5000 suns! Mirrors. Lots of mirrors. 5800 of them, to be precise. It's pretty cool (and a LOT scary) what kind of power can be harnessed by arranging mirrors onto a fiberglass satellite dish and aligning it to the sun. |
 |
6 Rubens Tubes Visualizer Hrm, a flame visualization for music? SIGN ME UP. Turn it into a handy-dandy plug-in accessory for the iPod, for the best on-the-go pyrotechnics you can possibly imagine. Might want to make sure you turn it off before tucking it away in your pocket, though. |
 |
Solar Engineer Badge on DIY So, you think you like DIY? Well, it's time to prove your chops by completing challenges over at diy.org. They even have a Solar Engineer Badge that features a bunch of project ideas, including our Instructable for the Solar Powered Miniball. |
We were once hoping that we could instead celebrate by racing giraffes through obstacle courses, but that didn't pan out. Too bad. I was planning on decking mine out with some sweet black and white racing stripes, to make it look like a very oddly proportioned zebra.
MORE POSTS
Circuit: L293D Mini-Sumo
This circuit is used to create a simple "edgebot" sumo robot. Being an edgebot refers that it will repeat the same backup/turn/go forward action when it's single edge sensor detects the edge of the ring. This version of the circuit is quite simple, and always turns the same way.
New Product: LEDs & Wire
Individually mounted WS2812B LED - Black or White $1.62 Super-tightly PCB-mounted WS2812B addressable LEDs, available in white or black trim. SuperFlex Wire 6M on Bobbin $5.85 This 6M bobbin of 26AWG Superflex wire is a soft and supple, ideal for wearable technology. Superflex 4.5m 90 LED Strand, 5cm Spacing $6.28 90 tiny LEDs of various […]
The Solarbotics GraviTrack Marble Machin...
Our GraviTrack Marble Machine Kit is our newest addition to the Marble-Drop mechanism family. Elegant, swooping hands pass marbles to each other to the top of a sweeping multi-level track, available in either solar or battery configuration! Approximately twice as wide as our spiral Solar or Battery Marble machine kits, the GraviTrack is still desk-top […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.