Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
Wednesday Cool Links: Carbomorph, Textil...
Solar botics
February 7, 2013
Hey, today's cool links are so cool that nothing need to be said in their defense (except for that Thursday is new Wednesday now!). At all. Anyone, try to prove me wrong! Here, you can't. I thought so... So enjoy this truly exquisite selection, and next week we're gonna bring you more on our softest ostrich-feathered wings.
|
Carbomorph Material Enables 3D-Printed Electronics, From Any 3D Printer While 3D printers are good for creating models and various objects, there's another universe of possibilities that opens up with printing with conductive material. |
 |
Venus Dress by Eunmi Jung What can you do with a few motors, an Arduino, some LEDs and a distance sensors Anything, you'd say. Sure, but this is an eerily beautiful example of blending fashion with electronics. |
 |
Firewall by Aaron Sherwood and Mike Allison Another awesome project along the lines of conductive, interactive and textile-y. The stretched spandex reacts as a membrane that responds with fire-like visuals. It is also sensitive to the depth of presses, responding with faster/slower and/or louder/quieter music. |
 |
Build a Bioprinter from Very Old inkjet Cartridges Make a printer from hacked inkjet and some computer parts? Load it with some live bacteria that glow in the dark? Sounds like a good ransom letter recipe to me... Although the authors state there are a legitimate uses for this thing... |
 |
Ostrich Pillow Never wanna see anyone again? Erm, I meant take a power nap or remedy a jet lag before it hits? Ostrich Pillow is the answer. The creators of this clever device made it successfully on the Kickstarter too. |
Nope. Not saying anything any more. Except for what I already said. And that's it. Nothing else. At all. You got me. Nothing to see here.
MORE POSTS
BEP Documentation Correction...
Just a quick note for those of you who have been trying to build the SC1 Servocores with the 0.01uF capacitors as listed in the parts list. That's an error! 0.1uF is just fine. Documentation has been revised accordingly. Sorry for the error!
Canada Post Strike: Shipping Delay
Due to the current rotating strike for Canada Post employees, all orders placed with Canada post shipping in the last 2 days will experience a slight delay. To help alleviate this issue, any orders over $99.00 which currently ship with Canada Post will automatically be switched to UPS to avoid these delays even if you […]
Friday New Product: Brackets and Push Bu...
Another Friday has arrived, and with it we have some new mounting hardware and buttons to look at: Pololu Mini Plastic Gearmotor bracket Pair - Wide $3.25 Affix our GM6 and GM7 motors to any project with these plastic motor brackets. Pololu Mini Plastic Gearmotor bracket Pair - Tall $3.25 Affix our GM6 and GM7 […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.