Today is Friday. Lets celebrate by using only green towels and omitting the letter R. Or just seeing what new stuff we got: Arduino Yun $71.95 Take a wireless router-on-a-chip, and stick an Arduino Leonardo to it - that's the new Arduino YUN! Evil Mad Science The Three Fives Kit $35.00 Take a venerable 555 […]
Wednesday Cool Links, Announcements and ...
Solar botics
September 11, 2013
We were at the San Mateo MakerFaire, and were representing for BPS breadboards. They've announced their winners, and the first place went to Elizabeth from Houston, Texas (age 11) (and we like unicorns too):
Now that we have established our stance towards robotic (roboCorns) and regular unicorns (unicornus vulgaris), here's some links. They are just as magical:
 |
Fletcher Tables This is definitely out of garage-duct tape-hot glue DIY range, but the craftsmanship is amazing, especially it's worth seeing it in motion, check out the video. |
 |
Robosans: Robot Made Digital Typography An intersection of typography and robotics, a font created by manipulating the controller on the OWI robotic arm. |
 |
Completely analog electronic music box An analog music box [Steven Dufresne], that uses 555 timer and can generate 13 different tones. Electronically simple and mechanically elegant solution. And it plays music! |
 |
NES: Nixie Entertainment System Tiny nixies are fun! Nintendo emulator combined with a nixie clock by [Bradley W. Lewis] is all kinds of retro-tastic. |
 |
Watch JPL's RoboSimian Do Pull-Ups We've seen lots of articulated robots, but this one eerily resembles a simian, with all four limbs capable of mobility and manipulation. |
Oh, do I ever wish I had a roboCorn to hold things, for example as my coat rack... But isn't that a waste of unicornal resources? Dear Elizabeth from Houston, Texas, please build one for me, I would find a good use for it.
And before I conclude, wanted to mention that Solarbotics will have a booth at the MakerFaire YYC at Alberta College of Art+Design on September 13 and 14, with the various electronic goodies and the Arduino workshop. Also noteworthy are our fellow Calgary manufacturers - BPS, the makers of prototyping boards, who I mentioned at the beginning of this post in relation to the unicorns. They (not unicorns, the BPS!) will also be doing a demo on using C Programming for AVRs/Arduinos and a demo on using breadboards.
See y'all (or some) there!
MORE POSTS
Arduino Parts and Other Things, Too
Remember the other week when we mentioned how the Arduino Parts category was looking rather thin? Well, we've gone ahead and fattened it up a bit with the following new items: 16MHz Through-Hole Crystal for Arduino Ardubot Bare PCB Barrel Power Jack 2.1mm Connection You might be wondering what the heck does a power jack […]
Red Lanterns Back in Stock
For all of you holding out to get your Valentine's Day Lantern in red, the wait is over! It's now back in stock and ready to order. You can get your HexPummer Lantern right here.
SCC3733 Solarcell hacking
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.