Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
Wednesday Cool Links, Announcements and ...
Solar botics
September 11, 2013
We were at the San Mateo MakerFaire, and were representing for BPS breadboards. They've announced their winners, and the first place went to Elizabeth from Houston, Texas (age 11) (and we like unicorns too):
Now that we have established our stance towards robotic (roboCorns) and regular unicorns (unicornus vulgaris), here's some links. They are just as magical:
 |
Fletcher Tables This is definitely out of garage-duct tape-hot glue DIY range, but the craftsmanship is amazing, especially it's worth seeing it in motion, check out the video. |
 |
Robosans: Robot Made Digital Typography An intersection of typography and robotics, a font created by manipulating the controller on the OWI robotic arm. |
 |
Completely analog electronic music box An analog music box [Steven Dufresne], that uses 555 timer and can generate 13 different tones. Electronically simple and mechanically elegant solution. And it plays music! |
 |
NES: Nixie Entertainment System Tiny nixies are fun! Nintendo emulator combined with a nixie clock by [Bradley W. Lewis] is all kinds of retro-tastic. |
 |
Watch JPL's RoboSimian Do Pull-Ups We've seen lots of articulated robots, but this one eerily resembles a simian, with all four limbs capable of mobility and manipulation. |
Oh, do I ever wish I had a roboCorn to hold things, for example as my coat rack... But isn't that a waste of unicornal resources? Dear Elizabeth from Houston, Texas, please build one for me, I would find a good use for it.
And before I conclude, wanted to mention that Solarbotics will have a booth at the MakerFaire YYC at Alberta College of Art+Design on September 13 and 14, with the various electronic goodies and the Arduino workshop. Also noteworthy are our fellow Calgary manufacturers - BPS, the makers of prototyping boards, who I mentioned at the beginning of this post in relation to the unicorns. They (not unicorns, the BPS!) will also be doing a demo on using C Programming for AVRs/Arduinos and a demo on using breadboards.
See y'all (or some) there!
MORE POSTS
Friday New Product: PCBGrip
PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. T-Bolt Accessory (pairs) […]
New Product Monday
AxiDraw V3 669CAD / 525USD AxiDraw is a high performance personal writing and drawing machine. MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom 21.55CAD / 16.91USD This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees […]
RW2i - Internal mount, and new shaft hol...
We're still digging out the new inventory, and the next addition to the Solarbotics lineup is the RW2i, which is the same profile and rolling size as our very popular RW2, but is designed with a narrow hub.We're able to do this by moving the set-screw hole inside the hub, so to cinch the screw […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.