"Project Monday"? What the heck is that? We're giving our news postin' habits a bit of an overhaul. Here's the plan: instead of one massive newspost once a week, we're going to break things up a bit. Monday's we'll post a cool project or tutorial that might be fun to try. Wednesdays, we'll post some […]
Wednesday Cool Links, Announcements and ...
Solar botics
September 11, 2013
We were at the San Mateo MakerFaire, and were representing for BPS breadboards. They've announced their winners, and the first place went to Elizabeth from Houston, Texas (age 11) (and we like unicorns too):
Now that we have established our stance towards robotic (roboCorns) and regular unicorns (unicornus vulgaris), here's some links. They are just as magical:
 |
Fletcher Tables This is definitely out of garage-duct tape-hot glue DIY range, but the craftsmanship is amazing, especially it's worth seeing it in motion, check out the video. |
 |
Robosans: Robot Made Digital Typography An intersection of typography and robotics, a font created by manipulating the controller on the OWI robotic arm. |
 |
Completely analog electronic music box An analog music box [Steven Dufresne], that uses 555 timer and can generate 13 different tones. Electronically simple and mechanically elegant solution. And it plays music! |
 |
NES: Nixie Entertainment System Tiny nixies are fun! Nintendo emulator combined with a nixie clock by [Bradley W. Lewis] is all kinds of retro-tastic. |
 |
Watch JPL's RoboSimian Do Pull-Ups We've seen lots of articulated robots, but this one eerily resembles a simian, with all four limbs capable of mobility and manipulation. |
Oh, do I ever wish I had a roboCorn to hold things, for example as my coat rack... But isn't that a waste of unicornal resources? Dear Elizabeth from Houston, Texas, please build one for me, I would find a good use for it.
And before I conclude, wanted to mention that Solarbotics will have a booth at the MakerFaire YYC at Alberta College of Art+Design on September 13 and 14, with the various electronic goodies and the Arduino workshop. Also noteworthy are our fellow Calgary manufacturers - BPS, the makers of prototyping boards, who I mentioned at the beginning of this post in relation to the unicorns. They (not unicorns, the BPS!) will also be doing a demo on using C Programming for AVRs/Arduinos and a demo on using breadboards.
See y'all (or some) there!
MORE POSTS
Epilog Laser Problems/Solutions, New Pro...
This week, we've had a lot of fun with our Epilog Laser. And by fun, I obviously mean "turmoil and general miserableness". Fortunately, we've sorted the issue out. What I'm going to do is chronicle our pains, describing the exact issue and solution, so that The Googles will index the knowledge for other explorers of […]
Remember the GM5?
Hoped you ordered one while you had the chance - they're all gone now! I will most likely be a looong time before these come back, so please don't contact us asking for more - it was a rare deal for Solarbotics, which we were glad to bring to you for as long as it […]
Symet Workshop
Here's something to take a boo at a workshop by Tom Mair and a Grade-5 class. From his message to the BEAM mailing list: Last year I helped Mrs. Corbett's Grade 5 class build robots and we had a blast (see a review here http://www.aasland.com/hcrd.html). Well, this year we are doing it again. We're building […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.