Solarbotics has been a regular at the Calgary Comic & Entertainment Expo for quite a few years now. Throughout the years we've shown off multiple projects that we created ourselves and in collaboration with some brilliant costume and prop designers. Here is a recap of the most impressive projects. We are always happy to assist […]
Wednesday Cool Links, Announcements and ...
Solar botics
September 11, 2013
We were at the San Mateo MakerFaire, and were representing for BPS breadboards. They've announced their winners, and the first place went to Elizabeth from Houston, Texas (age 11) (and we like unicorns too):
Now that we have established our stance towards robotic (roboCorns) and regular unicorns (unicornus vulgaris), here's some links. They are just as magical:
 |
Fletcher Tables This is definitely out of garage-duct tape-hot glue DIY range, but the craftsmanship is amazing, especially it's worth seeing it in motion, check out the video. |
 |
Robosans: Robot Made Digital Typography An intersection of typography and robotics, a font created by manipulating the controller on the OWI robotic arm. |
 |
Completely analog electronic music box An analog music box [Steven Dufresne], that uses 555 timer and can generate 13 different tones. Electronically simple and mechanically elegant solution. And it plays music! |
 |
NES: Nixie Entertainment System Tiny nixies are fun! Nintendo emulator combined with a nixie clock by [Bradley W. Lewis] is all kinds of retro-tastic. |
 |
Watch JPL's RoboSimian Do Pull-Ups We've seen lots of articulated robots, but this one eerily resembles a simian, with all four limbs capable of mobility and manipulation. |
Oh, do I ever wish I had a roboCorn to hold things, for example as my coat rack... But isn't that a waste of unicornal resources? Dear Elizabeth from Houston, Texas, please build one for me, I would find a good use for it.
And before I conclude, wanted to mention that Solarbotics will have a booth at the MakerFaire YYC at Alberta College of Art+Design on September 13 and 14, with the various electronic goodies and the Arduino workshop. Also noteworthy are our fellow Calgary manufacturers - BPS, the makers of prototyping boards, who I mentioned at the beginning of this post in relation to the unicorns. They (not unicorns, the BPS!) will also be doing a demo on using C Programming for AVRs/Arduinos and a demo on using breadboards.
See y'all (or some) there!
MORE POSTS
HexPummer Lanterns!
Our K HP HexPummer has always been a good, steady kit, but once we got our laser-cutter, we started experimenting... and was it ever neat to tuck one of these into a faux Japanese-style lantern! After upgrading two of the four LEDs with super-crazy-mega-bright LEDs, this solar-powered night-activated light show is quite a cool decoration, […]
2003 LANL Workshop
We've got the official "OK" to open up registration for the 2003 LANL BEAM Workshop in Los Alamos, New Mexico. The 3-day workshop is from May 1-3, with the 1-day following on May 4. Check it out at any of the following links: Direct IP link (until the following DNS entries echo through the web) […]
Closin' for Easter
It's Easter Break, and we at Solarbotics are shuttin' down for the weekend as of Thursday. See you Monday Morning!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.