Liquid Metal to Make Stretchable Electronics The elastic tech has huge potential for wearable tech, mobile devices, and even electronic "smart clothing." New Material Inspired by Geometric Patterns Inspired by the intricate geometries and repetitive patterns found in Islamic art, researchers at McGill University developed a material with new properties. (Via ZME Science) Kinematic Petals […]
Vintage AMPEX VR1200B 2" Quadruplex VTR ...
Solar botics
January 8, 2016
I occupy a studio space in a building that is a former movie shooting facility turned into an artist hovel. The building itself is wonderfully old but the hallways are also full of ancient audio and video equipment from the movie days. One of the things that got the attention of our RnD and tech geek was the AMPEX VR1200B Quadruplex videotape recorder from 1966. The machine stands about 5' tall, about the same in width, and weighs 'under 1000 pounds' as the spec sheet puts it. This was one of the first machines to use magnetic tape technology for recording video in the form of 2" quad tape for video, as opposed to film that was used previously.
A couple interesting points about this machine:
- 60PSI Air was needed for air bearings and a Venturi system for holding the 2" tape in alignment;
- These machines were the workhorses in TV Stations throughout the 60's and 70's. Running these machines required a full time technician!
Here's the beast in action:
A photoset of AMPEX VR1200B
An Overview of Ampex History:
MORE POSTS
New GM11-14 mounting screws
BOY those are strange little screws on the face of the GM11-14 series of gear motors! 1.7mm diameter x 0.35mm thread pitch ain't a common bolt, but we found some 4mm long that we've made available for those of you looking for a precision method of mounting the motors. Check out part M1.7x0.35!
Friday New Product: LED Strings, Snowfla...
Festive occasions are right around the corner so we thought we’d treat you to some shiny stuff. In these times of heightened economic activity (I mean mostly gift giving) some super bright 2.8Watt LEDs and tiny SMD LEDs on a wire that come in a variety of brilliant colours might come in handy for the […]
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.