150mm Futaba-style Servo cable, Double Female $1.95 Just a standard 0.1" pitch Futaba-style servo jumper cable, with female connectors on both sides. JST XH 2.5mm - 3 Pin plug & 100mm cable set $0.65 The JST XH 3-pin header & cable set. 100mm long, 2.5mm pin pitch. Raspberry Pi GPIO Ribbon 40-pin Cable, 6" long […]
Vintage AMPEX VR1200B 2" Quadruplex VTR ...
Solar botics
January 8, 2016
I occupy a studio space in a building that is a former movie shooting facility turned into an artist hovel. The building itself is wonderfully old but the hallways are also full of ancient audio and video equipment from the movie days. One of the things that got the attention of our RnD and tech geek was the AMPEX VR1200B Quadruplex videotape recorder from 1966. The machine stands about 5' tall, about the same in width, and weighs 'under 1000 pounds' as the spec sheet puts it. This was one of the first machines to use magnetic tape technology for recording video in the form of 2" quad tape for video, as opposed to film that was used previously.
A couple interesting points about this machine:
- 60PSI Air was needed for air bearings and a Venturi system for holding the 2" tape in alignment;
- These machines were the workhorses in TV Stations throughout the 60's and 70's. Running these machines required a full time technician!
Here's the beast in action:
A photoset of AMPEX VR1200B
An Overview of Ampex History:
MORE POSTS
Faster Download Times!
We are improving the site once again! You'll notice that our Products, Galleries, and Old News page(s) will load faster. All the same information is there, it just has a more streamlined approach, reducing the download time (especially for Sherline Machines!). So check it out! Read More...
Canadian Thanksgiving, eh?
Sorry, our office is closed Monday, October 11 for Canadian Thanksgiving. Being further north, we have to eat our turkeys sooner. If we don't do it now and celebrate it with our American cousins next month, the turkeys freeze to the tundra, and we have to suck on Turkeysicles. Ick. We'll be back to work […]
3D Printed frame for Line Follower
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.