We are going places! And coming back! And going again! Does that sound familiar? I think I said that before. Yeah, that’s what we do, we are unstoppable indeed. In this case, we are very excited to be going to the Open Hardware Summit at the Massachusetts Institute of Technology as a really soon – on […]
Vintage AMPEX VR1200B 2" Quadruplex VTR ...
Solar botics
January 8, 2016
I occupy a studio space in a building that is a former movie shooting facility turned into an artist hovel. The building itself is wonderfully old but the hallways are also full of ancient audio and video equipment from the movie days. One of the things that got the attention of our RnD and tech geek was the AMPEX VR1200B Quadruplex videotape recorder from 1966. The machine stands about 5' tall, about the same in width, and weighs 'under 1000 pounds' as the spec sheet puts it. This was one of the first machines to use magnetic tape technology for recording video in the form of 2" quad tape for video, as opposed to film that was used previously.
A couple interesting points about this machine:
- 60PSI Air was needed for air bearings and a Venturi system for holding the 2" tape in alignment;
- These machines were the workhorses in TV Stations throughout the 60's and 70's. Running these machines required a full time technician!
Here's the beast in action:
A photoset of AMPEX VR1200B
An Overview of Ampex History:
MORE POSTS
Vibebots for fun
We do some stuff around the office just for fun once-in-a-while. One of these projects resulted in this set of Vibebots, built by Grant McKee. Simple, a bit noisy, but FUN!
Telephone Troubles...
In anticipation of our move to a new facility in a week or so, we've been getting the telephone company to tweak up our accounts. Which they've promptly managed to bung up nicely. If you're trying to get ahold of us and are getting "This number is not in service...", hang tough - all should […]
Friday New Product: Brackets, Power Jack...
Woooo, new stuff, finally here! OpenBeam T Joining Plate, Anodized Aluminum - 2 Pack $1.90 T-shaped joining plates for all your OpenBeam creations! OpenBeam L Joining Plate, Anodized Aluminum - 2 Pack $1.90 L-shaped joining plates for all your OpenBeam creations! This one handily supports 45 & 90 angles. 5.5-2.1mm DC Power Jack - Female […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.