I occupy a studio space in a building that is a former movie shooting facility turned into an artist hovel. The building itself is wonderfully old but the hallways are also full of ancient audio and video equipment from the movie days. One of the things that got the attention of our RnD and tech geek was the AMPEX VR1200B Quadruplex videotape recorder from 1966. The machine stands about 5' tall, about the same in width, and weighs 'under 1000 pounds' as the spec sheet puts it. This was one of the first machines to use magnetic tape technology for recording video in the form of 2" quad tape for video, as opposed to film that was used previously.
A couple interesting points about this machine: - 60PSI Air was needed for air bearings and a Venturi system for holding the 2" tape in alignment; - These machines were the workhorses in TV Stations throughout the 60's and 70's. Running these machines required a full time technician!
We've got a pretty long lineup of new product waiting for their turn to be presented to you. First off, we are now carrying a large selection of protoboards from BusBoard, first 3 are right here, along with some other cool stuff: BPS SB300 Solderable Breadboard (360 tie-points) $3.99 Want to move quickly from prototype […]
The Googles tell us that 'synapse' is defined as "a junction between two nerve cells, consisting of a minute gap across which impulses pass by diffusion of a neurotransmitter." This, however, is one of the rare instances where The Googles are wrong, because what Synapse actually is (according to Jeremie, our tech guy) are RF engines […]
Solarbotics has been listed in the excellent Make: Magazine (The first magazine devoted to digital projects, hardware hacks, and D.I.Y. inspiration) as a supplier for the Mousey Junkbot project. We have what you're looking for! Simply click on this link to get all of the Mousey parts added to your cart. (Mouse shell, battery and […]
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.