Vintage AMPEX VR1200B 2" Quadruplex VTR ...

Solar botics
January 8, 2016

I occupy a studio space in a building that is a former movie shooting facility turned into an artist hovel. The building itself is wonderfully old but the hallways are also full of ancient audio and video equipment from the movie days. One of the things that got the attention of our RnD and tech geek was the AMPEX VR1200B Quadruplex videotape recorder from 1966. The machine stands about 5' tall, about the same in width, and weighs 'under 1000 pounds' as the spec sheet puts it. This was one of the first machines to use magnetic tape technology for recording video in the form of 2" quad tape for video, as opposed to film that was used previously.

A couple interesting points about this machine:
- 60PSI Air was needed for air bearings and a Venturi system for holding the 2" tape in alignment;
- These machines were the workhorses in TV Stations throughout the 60's and 70's.  Running these machines required a full time technician!

Here's the beast in action:

A photoset of AMPEX VR1200B

An Overview of Ampex History:

MORE POSTS

June 1, 2017
Interactive String LED Floor Mandala at ...

Because... of things... Solarbotics didn't do a booth or official presence at this year's Bay Area MakerFaire. We opted to do something fun this time, building a custom just-for-the-fair piece of sorta-interactive LED artwork. Following on the success of the quickie LED floor mandala resting area we did at the NYC MF, we turned it […]

June 21, 2005
New Treads...nummy!

We've got an inventory in of treads, cogs, and idlers that mate up with our GM2/3/8/9 gear motors! You wanna build a photovore or Herbie with attitude? Get at it! You may want to pay special attention to the GMTPkg tread deal. It includes a pair of GM2/3/8/0 style gear motors, so you're ready to […]

April 24, 2015
Friday New Product: Grove and More

Time for a big product update! Again, we're thrilled with the Grove line of microcontroller-interconnected thingies, so heres a few more Grove-compatibles, SD cards, and a lonesome piezo speaker:

April 11, 2014
Friday New Product: LilyTwinkle, Teensy ...

It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]

1 8 9 10 11 12 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart