It's a short week this week, so new product is coming early. We are closed Friday April 18th, which is hence called Good Friday. LilyPad Arduino SimpleSnap with LiPoly cell $29.95 This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino […]
Vancouver Mini Maker Faire
Dave Hrynkiw
June 13, 2011
The best part of being a company in Canada is that you don't need to leave the country to go there. That being said, we're going to show some of our fellow Canuck's some lovin' by attending the Vancouver Mini Maker Faire at the Great Northern Way Campus from June 25th-26th. We'll bring a handful of our more popular kits and acessories with us, along with some stuff that we distribute for SparkFun, Adafruit, and a few others. But wait, THERE'S MORE! We'll also be recreating the magical experience of a 100% free ARDX workshop. Drop by our booth, and we'll set you up with a couple Arduino-based experiments to try and give you any help you might need along the way. We'll even throw in a lil' treat for participating. This is a great chance for west coasters that didn't make it down to San Franscisco last month to experience Maker Faire. Be sure to drop by and say hello if you're in the area!
MORE POSTS
New Product: Metric Hardware
M3x10mm Allen Hex Socket Head Cap Black Steel Screw, 10 pcs 1.90 M3x10mm Allen Hex Socket Head Cap Black Steel Screw, 10 pcs M1.7x4mm 304 Stainless Steel Cross countersunk head Machine Screw $1.95 M1.7x4mm 304 Stainless Steel Philips head countersunk machine screws, qty 10 M3x3mm Hex Socket Head Set Screws Cup Point (grub) $1.95 Don't […]
BEP Application: Wilf Rigter Solar Power...
The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.
Project Monday: All-Seeing Eye
This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.