Hey, we survived MakerFaire, now we got new challenges. Good weather is one of them. But the internet can help. Stay put, there's nothing to see out there. The outdoor reality doesn't blink, pan or murmur, or at least not as often as those links below: Stryfe Motor Replacement! A wicked nerf gun mod - […]
Vancouver Mini Maker Faire
Dave Hrynkiw
June 13, 2011
The best part of being a company in Canada is that you don't need to leave the country to go there. That being said, we're going to show some of our fellow Canuck's some lovin' by attending the Vancouver Mini Maker Faire at the Great Northern Way Campus from June 25th-26th. We'll bring a handful of our more popular kits and acessories with us, along with some stuff that we distribute for SparkFun, Adafruit, and a few others. But wait, THERE'S MORE! We'll also be recreating the magical experience of a 100% free ARDX workshop. Drop by our booth, and we'll set you up with a couple Arduino-based experiments to try and give you any help you might need along the way. We'll even throw in a lil' treat for participating. This is a great chance for west coasters that didn't make it down to San Franscisco last month to experience Maker Faire. Be sure to drop by and say hello if you're in the area!
MORE POSTS
Escaps back in stock!
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer! Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!) It's a 3V rated motor, but our tests show that […]
Tech Tip: Micro Terminal Blocks
We use many, many devices with 0.1" spaced holes, which are pretty much an electronics design standard. We're finding these 0.1" space terminal blocks incredibly useful for making solid, secure, yet serviceable connections to the rest of our designs. We'll often reach for a microcontroller board, then reach for a necessary handful of these parts […]
2002 LANL Workshop in the works...
Word from up the pipe at the Los Alamos National Laboratories is that the 10th Annual BEAM workshop is slated to happen May 2-4, 2002 at the Betty Ehart Center in Los Alamos, New Mexico (same place as the 1999 workshop). Thanks to Joe Vigil (of LANL) who spearheaded the initiative after Paul Argo (the […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.