Vancouver Mini Maker Faire

Dave Hrynkiw
June 13, 2011

The best part of being a company in Canada is that you don't need to leave the country to go there. That being said, we're going to show some of our fellow Canuck's some lovin' by attending the Vancouver Mini Maker Faire at the Great Northern Way Campus from June 25th-26th.  We'll bring a handful of our more popular kits and acessories with us, along with some stuff that we distribute for SparkFun, Adafruit, and a few others. But wait, THERE'S MORE! We'll also be recreating the magical experience of a 100% free ARDX workshop. Drop by our booth, and we'll set you up with a couple Arduino-based experiments to try and give you any help you might need along the way. We'll even throw in a lil' treat for participating. This is a great chance for west coasters that didn't make it down to San Franscisco last month to experience Maker Faire. Be sure to drop by and say hello if you're in the area!

MORE POSTS

November 2, 2009
Oomlout - Solarbotics Edition!

Good news, good news! We've been following the Oomlout system of learning Arduino since last February, and we've finally finished putting together our own Solarbotics Edition of the open-source ARDX Arduino Experimenter's Kit. Besides just working with the fine folks at Oomlout to make sure our edition meets their high standards, we've also been contributing […]

September 19, 2000
SSK Head to SW2 instructions / schematic...

Still slogging through the backlog of "things to add to the website". One of them is the ScoutWalker/SunSeeker interface instructions, in PDF format (as per usual). So if you want to see exactly how we get the head "talking" to the body, and what the exact circuitry is, come take a look! We also are […]

September 1, 2015
Tuesday New Product: Batteries, Pi Wedge...

Lithium Ion (LiPoly) Battery - 110mAh 3.7V $8.34 Lithium polymer battery, but darn small! 3.7V 110mAh LiPoly battery for E-Textiles $8.34 What makes this battery special for E-textiles? Built-in current limiting for safety. SparkFun Pi Wedge B+ $9.55 A prototyping Wedge for Raspberry Pi B+ that allows you to use a shield and a protoboard […]

September 18, 2009
BlinkM, LilyPad, SparkFun

A SparkFun PCB, three BlinkM LEDs, three LilyPads and a PICAXE USB Programmer walk into a bar. The bartender looks up and asks, "What is this, a newspost?" The answer to that question would be YES! Chekkit oot: SparkFun Ardubot Bare PCB BlinkM Smart LED BlinkM MaxM Ultrabright Smart LED BlinkM RGB Blaster LilyPad Temperature […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart