So, I writes this book, see? And it sells pretty good, so in November, I orders more books, see? And they says "HEY! We gots none left - calm down, we're printing more". So, I sits and waits, and FINALLY they comes in! Here's the great part: It looks like this is the new printing, […]
Useless (Xmas) Machines!
Dave Hrynkiw
December 13, 2010
We're teaming up with Brett Coulthard of Saskview.com to get their version of the Useless Machine put together as a parts bundle. We just finished it Friday night, and quick-posted tweets & a few photos of it, and are shipping today!
What comes in the bundle? Pretty much everything you need to successfully build a Useless Machine of your own:
- 1 x 39300 Black acrylic "Useless Box" construction set (with nut/bolt hardware)
- 1 x SWT8 DPDT toggle switch
- 1 x SWT9 SPDT lever switch
- 2 x #2 mounting screws for SWT9
- 1 x BHoldAA 2-AA battery pack
- 1 x DSST (double sided sticky tape, for mounting the battery pack)
- 6" hookup wire
- 1 x GM4 gear motor
- 4 x "Little Rubber Feet" to protect your Useless machine from abrasive counter tops!
We're only offering the box in black acrylic at the moment (experimented with clear - ehk), but if you ask really nicely, we probably could run one in red, blue, green, orange, white and (if you really want it), clear. Call in if you want any of those options.
Speaking of cool "Useless machines", Tony Youngblood's Christmas version was just featured on the Makezine Blog. He built his with our GM8 for super-fast response (we did our bundle with the slower GM4 - we like a more deliberate "ME: OFF" response).
MORE POSTS
K SMD Motor Driver
Got a new kit for you - the K SMD L293D Motor Driver. No, no, the SMD isn't "surface mount" - it's the Secret Motor Driver! This L293D-based motor driver fits secretly inside most standard servo cases like the Futaba S3003/S148, and our own GM4 gear motors. It replaces the low-voltage original electronics with LED-indicated, […]
Spontaneous Skeleton Staff
We're not really into horoscopes that much, but generally we try to keep the company stars aligned. Sometimes, though, the stars do not align, and decided to go on spontaneous day trips to other corners of the galaxy. It's all well and good for the stars, but the planets really get confused and end up […]
New TINY Pogo Pin Probes
We had some requests for some really, really small Pogo Push Pin Probes (Hmmm...shoulda named them PPPPs...). Anyway, here's the PP8s and the PPH2, which are the "short" version of the PP8 and the necessary holder to mount them. If you have really tight spaces you need to test, these are the probes you'll need!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.