Ok, switches everywhere! Most importantly, switching from Friday to Saturday is scheduled exactly at 12.00pm tonight, hopefully it happens on time. Because it was a long five days, and another seven before that, and then another seven. Should I continue? I think we all deserve a little bit of time titled Saturday and Sunday. Also, […]
Useless (Xmas) Machines!
Dave Hrynkiw
December 13, 2010
We're teaming up with Brett Coulthard of Saskview.com to get their version of the Useless Machine put together as a parts bundle. We just finished it Friday night, and quick-posted tweets & a few photos of it, and are shipping today!
What comes in the bundle? Pretty much everything you need to successfully build a Useless Machine of your own:
- 1 x 39300 Black acrylic "Useless Box" construction set (with nut/bolt hardware)
- 1 x SWT8 DPDT toggle switch
- 1 x SWT9 SPDT lever switch
- 2 x #2 mounting screws for SWT9
- 1 x BHoldAA 2-AA battery pack
- 1 x DSST (double sided sticky tape, for mounting the battery pack)
- 6" hookup wire
- 1 x GM4 gear motor
- 4 x "Little Rubber Feet" to protect your Useless machine from abrasive counter tops!
We're only offering the box in black acrylic at the moment (experimented with clear - ehk), but if you ask really nicely, we probably could run one in red, blue, green, orange, white and (if you really want it), clear. Call in if you want any of those options.
Speaking of cool "Useless machines", Tony Youngblood's Christmas version was just featured on the Makezine Blog. He built his with our GM8 for super-fast response (we did our bundle with the slower GM4 - we like a more deliberate "ME: OFF" response).
MORE POSTS
Heated Car Seat Teardown and Repair
Here's a little makeover of an inexpensive aftermarket heated car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to […]
Introducting the CMDR Shield for Arduino
Last week we beefed up the Ardweeny with the Multipack, and this week we're turning out attention to the Arduino. We've just released the CMDR (Compact Motor Driver) Shield, which lets you bi-directionally drive two gear motors or a single stepper motor, read 6 analog sensors, and control up to 8 servos all at the […]
Cold, hard, steel... mounts!
Need another way to mount your GM2/3/8/9 gear motors? Their built-in holes are nice, but sometimes, you have to really clamp it down in a different way. Welcome the GMB28 (for GM2/GM8) and GMB39 (for GM3/GM9)! We now have our own custom-made laser-cut steel mounts that clamp and bolt your motor down securely and easily!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.