Temporary Tattoos to Monitor Vitals An lighter more wearable alternative to FitBit (Via Beautiful Decay) Laser-Cut Wood Illustrations Layering laser-cut wood taken to a whole new level, by Martin Tomsky (Via Colossal) Tiny V8 Engine Out of Paper Paper can be exceptionally sturdy, especially when strengthened by glue. By Aliaksei Zholner (Via Gizmodo) REM Detection […]
Useless (Xmas) Machines!
Dave Hrynkiw
December 13, 2010
We're teaming up with Brett Coulthard of Saskview.com to get their version of the Useless Machine put together as a parts bundle. We just finished it Friday night, and quick-posted tweets & a few photos of it, and are shipping today!
What comes in the bundle? Pretty much everything you need to successfully build a Useless Machine of your own:
- 1 x 39300 Black acrylic "Useless Box" construction set (with nut/bolt hardware)
- 1 x SWT8 DPDT toggle switch
- 1 x SWT9 SPDT lever switch
- 2 x #2 mounting screws for SWT9
- 1 x BHoldAA 2-AA battery pack
- 1 x DSST (double sided sticky tape, for mounting the battery pack)
- 6" hookup wire
- 1 x GM4 gear motor
- 4 x "Little Rubber Feet" to protect your Useless machine from abrasive counter tops!
We're only offering the box in black acrylic at the moment (experimented with clear - ehk), but if you ask really nicely, we probably could run one in red, blue, green, orange, white and (if you really want it), clear. Call in if you want any of those options.
Speaking of cool "Useless machines", Tony Youngblood's Christmas version was just featured on the Makezine Blog. He built his with our GM8 for super-fast response (we did our bundle with the slower GM4 - we like a more deliberate "ME: OFF" response).
MORE POSTS
Canada Day & 4th of July
We'll be closed Thursday June 1st, as it is Canada Day! Ah, time to take off the snow-shoes and swim with the polar bears, and eat snow-cones with our Husky dogs to celebrate Canada's birthday! It's worth noting that we will be open on July 5 (most of you Americans get Monday off, right?).
Push Pin Videos
We've had some requests on exactly what do the pushpins do. So, we added videos for two of them. Push Pin 1 (Masher Point) Push Pin 3 (Chisel Point)
Solarbotics and Art Hack II at Alberta C...
Solarbotics has supplied some tech bits and pieces for the recent ART HACK II, an intensive artistic boot camp led by Visiting Artist, Raul Nieves (Blablablab, Practipo Barcelona), where students were building open source the 3D printers.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.