Useless (Xmas) Machines!

Dave Hrynkiw
December 13, 2010

We're teaming up with Brett Coulthard of Saskview.com to get their version of the Useless Machine put together as a parts bundle. We just finished it Friday night, and quick-posted tweets & a few photos of it, and are shipping today!

What comes in the bundle? Pretty much everything you need to successfully build a Useless Machine of your own:

  •   1 x 39300 Black acrylic "Useless Box" construction set (with nut/bolt hardware)
  •   1 x SWT8 DPDT toggle switch
  •   1 x SWT9 SPDT lever switch
  •   2 x #2 mounting screws for SWT9
  •   1 x BHoldAA 2-AA battery pack
  •   1 x DSST (double sided sticky tape, for mounting the battery pack)
  •   6" hookup wire
  •   1 x GM4 gear motor
  •   4 x "Little Rubber Feet" to protect your Useless machine from abrasive counter tops!

We're only offering the box in black acrylic at the moment (experimented with clear - ehk), but if you ask really nicely, we probably could run one in red, blue, green, orange, white and (if you really want it), clear. Call in if you want any of those options.

Speaking of cool "Useless machines", Tony Youngblood's Christmas version was just featured on the Makezine Blog. He built his with our GM8 for super-fast response (we did our bundle with the slower GM4 - we like a more deliberate "ME: OFF" response).

MORE POSTS

March 4, 2003
BEP Application #4 - The BBPV

We've churned out another Bicore Experimenter's PCB project: The "Bare Bones PhotoVore". This is an elegant little circuit, which offers the functionality of a basic photovore (with tactiles) all on a very simple circuit. Ours is solar-powered by a Miller Solarengine, but if you wanted to build one with a battery, your parts count would […]

March 15, 2004
New Solar Cell!

As Panasonic is no longer manufacturing their line of Sunceram solar cells, we've been on the hunt for suitable replacements. Here's our first find - the SCC3733! It's a polycrystaline cell in an epoxy casing, so it's a bit heavier, but much, much less prone to breaking or burning off of the solder-pads. It's also […]

July 22, 2016
New Product: Microcontrollers & Ras...

SparkFun Electric Imp Breakout $17.48 The SparkFun Electric Imp breakout board makes it easy to experiment with your Electric Imp IoT project. ESP-12F AP+STA Remote Serial Port WIFI Controller / Module $9.38 The ESP8266 (ESP-12F AP+STA) is a nice "Internet of Things" microcontroller with Wifi (or as a Wifi bridge for your project) Adafruit Metro […]

July 12, 2007
Circuit: Stepper Motor

This is a neat little one-chip circuit we originally tuned for use with our "SM1" Stepper motors. We've presently sold out of the motor, but this circuit has proved to be a good unidirectional (1-way) driver for small stepper motors.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart