We're starting to get feedback on Sumovore modifications by our customers. Like, turning the Sumovore into a Room-rover. Or 18V motor operation modifications. Or 'Kaoken' double-voltage adrenaline charges when pushing an opponent. All sorts of stuff! We'll start featuring these modifications shortly, but until then, you may want to take a look at our own […]
Useless (Xmas) Machines!
Dave Hrynkiw
December 13, 2010
We're teaming up with Brett Coulthard of Saskview.com to get their version of the Useless Machine put together as a parts bundle. We just finished it Friday night, and quick-posted tweets & a few photos of it, and are shipping today!
What comes in the bundle? Pretty much everything you need to successfully build a Useless Machine of your own:
- 1 x 39300 Black acrylic "Useless Box" construction set (with nut/bolt hardware)
- 1 x SWT8 DPDT toggle switch
- 1 x SWT9 SPDT lever switch
- 2 x #2 mounting screws for SWT9
- 1 x BHoldAA 2-AA battery pack
- 1 x DSST (double sided sticky tape, for mounting the battery pack)
- 6" hookup wire
- 1 x GM4 gear motor
- 4 x "Little Rubber Feet" to protect your Useless machine from abrasive counter tops!
We're only offering the box in black acrylic at the moment (experimented with clear - ehk), but if you ask really nicely, we probably could run one in red, blue, green, orange, white and (if you really want it), clear. Call in if you want any of those options.
Speaking of cool "Useless machines", Tony Youngblood's Christmas version was just featured on the Makezine Blog. He built his with our GM8 for super-fast response (we did our bundle with the slower GM4 - we like a more deliberate "ME: OFF" response).
MORE POSTS
New Product Monday
AxiDraw V3 669CAD / 525USD AxiDraw is a high performance personal writing and drawing machine. MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom 21.55CAD / 16.91USD This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees […]
Vancouver BEAM Workshop
Here's a few links to a workshop spear-headed by ScottyDogma in Vancouver, B.C. Some impressive work done using servos, BIOBug motors, some wooden spacer blocks and lots of soldering! Nice job, guys. Pics and movies: http://www3.telus.net/dogmabots Full Size (1344 x 1008, 500-700K) http://www.davehylands.com/VRC-BEAM-Workshop/index.html Half-Size (672 x 504, 100-150K) http://www.davehylands.com/VRC-BEAM-Workshop/Thumb-B/index.html
DragonTail Robot Platform And A Dancing ...
Halloween is upon us, and it looks like everyone is testing out their costumes. For instance, the trees are dressing up (or down?) as Naked Trees, and all the leaves are dressing up as Multicoloured Dead Leaves. It's all very exciting. But we've keeping our heads down and churning out some great stuff to show […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.