Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
Useless (Xmas) Machines!
Dave Hrynkiw
December 13, 2010
We're teaming up with Brett Coulthard of Saskview.com to get their version of the Useless Machine put together as a parts bundle. We just finished it Friday night, and quick-posted tweets & a few photos of it, and are shipping today!
What comes in the bundle? Pretty much everything you need to successfully build a Useless Machine of your own:
- 1 x 39300 Black acrylic "Useless Box" construction set (with nut/bolt hardware)
- 1 x SWT8 DPDT toggle switch
- 1 x SWT9 SPDT lever switch
- 2 x #2 mounting screws for SWT9
- 1 x BHoldAA 2-AA battery pack
- 1 x DSST (double sided sticky tape, for mounting the battery pack)
- 6" hookup wire
- 1 x GM4 gear motor
- 4 x "Little Rubber Feet" to protect your Useless machine from abrasive counter tops!
We're only offering the box in black acrylic at the moment (experimented with clear - ehk), but if you ask really nicely, we probably could run one in red, blue, green, orange, white and (if you really want it), clear. Call in if you want any of those options.
Speaking of cool "Useless machines", Tony Youngblood's Christmas version was just featured on the Makezine Blog. He built his with our GM8 for super-fast response (we did our bundle with the slower GM4 - we like a more deliberate "ME: OFF" response).
MORE POSTS
Phones Are Down
Yes! Phones refuse to work and we are currently beating them into submission with a complete trust in our victory over them. Also, just to let you know, we haven't fallen off the face of the planet, we are just very busy getting ready to the Calgary Comic & Entertainment Expo, which will take place […]
Monday New Product: Grove Sensor, Joysti...
Grove - Loudness Sensor $7.68 Detect sound with this well-engineered Grove loudness sensor. Grove - Thumb Joystick $7.68 A handy Grove module thumb-joystick. Grove - 3 pin to Grove 4 pin converter cable $.588 Add your traditional 3-pin GVS (Ground / Voltage / Signal) device to a Grove plug. Grove - Servo Branch Cable $5.88 […]
BEP Application: Bare Bones PhotoVore
We like to have some play time at Solarbotics, and the "Bare Bones Photovore" is the results of one of these play sessions. It's a very simple (amongst the simplest, we'll hazard to say) light-seeking solar-powered robot, and find it easy to build using the Bicore Experimenter's PCB.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.