USB PICAXE Bundles

Dave Hrynkiw
March 20, 2009

Hah! I told you! I told you! But did you believe me? NooOooOoooooOooo. What am I blathering on about, you ask?

Well, we finally now have all the PICAXE Starter Packs available with USB cables instead of serial. There are four new bundles in total:

All of these include a battery pack and cable, project board, and (of course) a PICAXE USB programming cable.  Each bundle is a bit different, so click on through to check out the details and specifics.

K CMDIn other news, our motor drivers are freaking awesome. And yes, that's a technical term - we'll abbreviate it to 'FA' for short. We get a lot of interest in the L298, particularly in regards to how to put this bad beast to work with some motors. It has some pretty impressive characteristics, operating from 6V-50V with a total output current of a 4A. But if you want to really get it going in your own FA designs, it can take a bit of effort. This is where our nifty L298 Compact Motor Driver Kit comes in. Within its 40mm/1.53" footprint, we cram in four indicator LEDs, EMF-protection diodes, terminals (for power and connections), and a handful of other neat-o features. Keep in mind that this is a kit, so you still get to build it yourself. And as always, it comes with our 100% satisfaction guarantee - there's free tech support and repair for those who need it. And hey - if you're looking for something similar but for the L293D, try our Secret Motor Driver!

Jérôme Demers, of a certain Beetlebot fame, is currently doing some work for us here at Solarbotics. He likes it so much that we installed a bed in the garage so that he can stay and work and never go anywhere else at all. Before the rest of us take off for the night we leave him large amounts of poutine, and when we arrive in the morning it's all gone and replaced with FA robots. His latest labour of love is a Joule Thief Lamp, that... Well, you can find out for yourself over at Instructables - Feel free to even throw a vote his way if you're so inclined. In the mean time, we'll just stock him up on an extra large pile of poutine before we take off for the weekend.

MORE POSTS

June 10, 2016
Canada Post Web Services Interruption

Due to scheduled maintenance by Canada Post on their Shipping and Tracking Web Services page we will be unable to provide shipping estimates between 7pm MDT on Saturday, June 11 and 12am MDT on Sunday, June 12. We apologize for any inconvenience this may cause.

July 3, 2015
Friday New Product: Kossel Accessories

Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]

July 14, 2006
Make 06 Trimet

Eric L. was so kind as to send us a link to a video of his Make 06 Trimet on YouTube. If you want to build your very own Trimet you can get all the parts here, and if you don't have the magazine, you can buy it here. Order both together and get 10% […]

June 25, 2013
Back on Track

Hey everyone, while parts of Calgary are still in recovery, things are now back to normal on our end. We're processing and shipping out on schedule, and unless you're in a flood-affected area you'll be receiving your order on time. Thanks for your patience!

1 22 23 24 25 26 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.