Hey look, we're at Maker Faire! Hey look, we're at the Solarbotics Office! ... Hey look, we're like an amoeba, splitting in half to be in two places at once. Ok, here's the skinny - Right now, most of our staff is US-bound to attend the previously mentioned MakerFaire in the San Mateo/Bay Area in […]
Updated Minisumo/Linefollower code
Dave Hrynkiw
December 4, 2003
Fixed a reset problem in the sumo code, turns out the a If...Then statement does not store its location on the stack. Ergo the return instruction at the bottom of the turn function was pulling a random location.
Anyway a change from a return to a goto and everything is shipshape, savvy? Then download the new Minisumo_linefollower2 code.
You will need to download the Editor
from Parallax to load and edit the code.
MORE POSTS
GM15s back in stock!
Sorry about the delay in making these available. These tiny 25:1 pager-sized gear motors are difficult to get built. BUT, we finally have more GM15 gearmotors in stock!
Protected: 3D Printer Training - Crealit...
There is no excerpt because this is a protected post.
Solarbotics Antweight
Adam Conus sent us a nice little message about his antweight combat robot The Fly.: Western Allied Robotics is kicking off another year of antweight combat events and I need new motors. (Because I'm very, very hard on them!) Still, they're cheap and light. Check out- http://home.comcast.net/~conusa/adam.htm to see the robot complete with solarbotics sticker!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.