'Twas the night before Christmas...

Solar botics
December 23, 2008

'Twas the night before Christmas and all through the shop
Not a creation was stirring (except the Turbot!).
All robots had been packed and shipped with care,
With hope, to their destination, they soon would be there.
 
The bosses and staff were heading home straight
To settle down to gift wrapping, probably 'til late.
When out in the alley, there arose a great a noise
A man in a red suit yelled, "We need some help boys!"
 
"You see Rudolph here,
Is a mighty fine deer,
But the light in his nose
Has gone out I fear!"
 
"We made it as far as your shop
Before his nose stopped.
With all of your parts and 'bots
Maybe you could help us a lot?"
 
So Dave in his hat (set in determination),
Made calls to suppliers across the nations.
The deliveries of parts came by couriers of fame
And he whooped and cheered and called them by name.
"On Fed Ex! On Canada Post! Go Purolator! Go UPS!"
 
While the couriers helped Santa loosen his load,
Solarbotics worked to fix Rudolph’s nose
(trust us...load and nose rhyme)
But what could we use, what would it be?
 
"Eureka!" Kathy shouted, "We’ll convert a PummLantern LED!"
Work on Rudolph’s solar powered nose had begun.
As everyone knows reindeer fly with the sun.
With design commenced on the nasal replacement,
The laser cut out the LED encasement.
 
With the laser finished humming and the lantern now "pumming"
Santa leapt to his seat and grabbed hold the reins,
Shouting "Happy Holidays to all, we’re on our way again!"
 
From the crew at Solarbotics,
Happy Holidays and a Peaceful New Year.

MORE POSTS

July 12, 2007
BEP Application: Wilf Rigter Solar Power...

The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.

May 29, 2010
LMR Start Here Kit, Beetlebot Preorders

Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome […]

February 21, 2014
Friday New Product and a Little Bit of F...

Solarbotics is helping out local fashion designers prepare their e-wearables for the Calgary MakeFashion. This time, Tony Grimes dropped in to experiment with his fiber-optic cloth from SensingTex as an illuminating surface, but the included 5mm LED was not dazzling enough. Time to hack in our 3W RGB Star Controller! The plan was to shift […]

September 22, 2017
The Solarbotics GraviTrack Marble Machin...

Our GraviTrack Marble Machine Kit is our newest addition to the Marble-Drop mechanism family. Elegant, swooping hands pass marbles to each other to the top of a sweeping multi-level track, available in either solar or battery configuration! Approximately twice as wide as our spiral Solar or Battery Marble machine kits, the GraviTrack is still desk-top […]

1 … 199 200 201 202 203 … 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart